Camera Rail Hidden Compartment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
A simple and discreet container for the Samsung smarttag2 and Apple airtag. Cannot be opened while on the rail. Options included for one with a screw, and one without. Both work basically the same.
Designed to be used with the LWS category of camera rails/rods. the rods are 60mm apart and have a 15mm diameter.
Does not rattle with carbon fibre infused filament. Use a UV/weather resistant filament. I suggest ASA-CF, PC-CF or ABS-CF. PETG-CF is UV resistant to some degree (better than PLA).
If your tag rattles inside, use a small dot of blutack.
For the model with a screw, use an M3*4 Heatset insert and a M3*16 (or M3*18) hex socket machine screw.
