1 / 1
E3D Hemera Eddy Coil Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount that puts a BTT Eddy Coil inline with the nozzle on a Hemera
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount puts an BTT Eddy Coil inline with the nozzle on a E3D Hemera extruder. There is 4mm of vertical adjustability. The bottom of the travel should but the probe at the same height as the nozzle. There is also a little bit of side to side adjustability from the t-slots on the Hemera. The screws that are included with the Hemera fit in the slots without bottoming out. The shorter screws that come with the Eddy Coil thread into the mount.
The y axis offset is 44.23mm.