The100 M4 extruder adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate to mount the Voron M4 extruder to the stock location on the100
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 1
- Views
- 76
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Found that my little extruder could not keep up with The100s speeds, I was getting skipped steps.
Had a M4 Mobius kit, and figured I would give it a shot.
I know the square nuts will not be as popular, but those are the bolts I had sitting on my desk.
Voron M4 Mobius (printed the mirrored parts)
6x M3 by 12 (extra ones you had to order for the frame)
2x M4 by 18 (I used Creality Ender 5 frame bolts)
2x M4 square head nuts
I used a 37mm depth motor, but I made the gap for the full length 47mm.
If you can't or don't want the square nuts, I included the FreeCAD file, remix to your hearts desire.
Added a 0.2mm Layer for supporting the M4 holes, so no need to print with supports.