Counting matching models…
Change log 2025/01/01 Added STEP and Fusion 360 source files. 2025/12/08 Added v10, only change is 5mm taller walls NOT for commercial use, if you want to sell these please get in touch. The charging cradle/puck prints with no supports…
Other requirements: 1. Gearbox (would be ideal but could also be used in a different way) 2. cylinder with no holes. 3. arduino or other fire control unit . (will work without it, just not efficiently at all.) 4. Air valve (I used one off…
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
A universal adapter for the X20V Parkide tool battery with an addon for connecting a Pinecil or T100 style soldering iron. The adapter can be used to attach your own addon. I included a step file for remixing the designs to your own…
I've included a Reverse Model for use with some 3rd party chargers. Fusion 360 File included!
2025/02/03 Added STEP file A collection of cases, frames or holders for the Seeed Studio SenseCap T1000-E. Any ideas welcome, please add your suggestion in the comments. Printing info (I use Orca Slicer 2.2.0): up right no supports needed…
There were a few errors with the meshes so parts were becoming separated and broken, they don't now. Also they are STL now instead of 3MF.
This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…
Schlitten für den Antrieb (DL-DT1005) für den JYSK-Fernsehsessel Der Schlitten beinhaltet das 2x14x8 Trapezgewinde oder andere Modell mit Trapezgewinde 2x14x6 Er ist einfach zu tauschen, in dem man die Antriebsverkleidung öffnet. Die…
This is a protective case for the Seeed SenseCAP T1000-E which lets it attach to Magsafe compatible phones. It is only 9.5mm thick and gives access to the button and the charging port on the back. There is also a slot cut out for a…
I'm printing these in PETG with 15% infill. But really all settings are at your discretion as long as the durability will suit your own purposes. I recommend ‘molle V2,’ especially for straps as the cuts are center on the molle clips…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
I just started playing with Meshtastic radios. I ordered a bunch of different ones. So far I like these the best: Seeed Studio T1000 ( https://amzn.to/3EzfasS ) Lilygo T-Echo ( https://amzn.to/4hq5UpG ) RAKWireless Wismesh Pocket (…
This is a limit switch carrier that can be added to a Raymarine tiller pilot to prevent the unit from self-destructing in case the motor attempts to drive the unit beyond its physical limits. It needs to be printed in PETG, HT-PLA or…
This is the dashboard switch cover. The model is designed based on the original cover from my 2002 Toyota Tacoma. It should also fit Hilux/4Runners/T100 as well. I've pictured the printed version next to my original one. To withstand the…
use m3 heat set insert (5mm OD, 3mm length) and 6mm m3 bolt OR just use zip ties in the corners 🤷
WORK IN PROGRESS - At this point no one has printed and assembled one of these units other than me. The documentation on required electronics, wiring, and software setup is not complete. At this point you should consider yourself an…
Piggyback clip that can be attached with double-sided adhesive tape and holds a single T1000-E. You may experience issues with reception depending on orientation and phone usage!
I am quite happy with my table saw MLT100 from Makita. Nevertheless, it is designed for cutting construction timber. But I often use it for cutting firewood made from crooked branches. In the process, from time to time the branches bounce…
This is a weed guard for use with Blue Robotics T100 and T200 thrusters. The front unit mounts under the stock nosecone. You will need two 10mm M3 stainless cap head bolts to mount this, the stock bolts are not long enough. The rear guard…
This 3D print helps position the magnetic charger for solid contact and worry-free charging of the Sensecap T1000-E in any orientation. Most charging sleds I found rely on the built-in magnets to keep the device seated, which didn’t…
Slide for the CNDOER DL-DT1005-001-02 (and probably other numbers). Threads are ISO Metric Trapezoidal 14x3 2 start threads. I chose to make the slide stronger than the origial, and therefore the aluminium cover can no longer fit. See the…
I use this clip: https://amzn.to/49yIZ8n But you can also just search for UV-K5 clip on ali or other sites. I printed it vertically to give it the strongest layer lines for both the clip and the tracker. So be sure to use a brim or raft…
A holder for magnetic cable for Sensecap T1000-E
Toyota T100 hood rod retainer. Probably could be generic. This version has a nice fit, but did fail when I tried to remove it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill:…
Print flat side down. Was designed for 0.45 mm line width. Adjust size +- 0.5% if necessarily.
Simple remix of nalanengine's base for the Wagner HT1000 heat gun. Great way to secure it when it's hot. The base simply slides onto the back end of the heat gun. The original is great, but its hollow base may be aesthetically pleasing…
CPAP and Wire Guide for RatRig Vcore3 ^300 with PT1000 mount and shelves Please upload your makes, would love to see them
I created this pegboard holder so my heat gun would have a place to live. I used generative design to create the back portion of the holder. So far I have had no issues with the hot heat gun warming up the holder or pegboard. This fits a…
V2 now available! I've updated the model with a cutout at the top to allow the T1000's strap or lanyard to pass through — a common issue with the original design. V2 also features smoother, more refined edges and additional rounding work…
Sensecap T1000-e wallmount Remixed from another design. Added walls so its more secure and straight when the card is in. If the cable comes out on top mirror the file. Otherwise your logo on the card will be upside down. Disclaimer My…
Quick manually measured model to test my and others' designs for fitment and orientation. I don't currently plan to print it, but if I do I'll print it vertically with a brim. The pics here are rendered from the textured Fusion model…
You need x5 m3 40mm screw x1 m3 10 screw and x4 m3 nuts. Molded sock fits like a glove on pt100 volcano heatblock
Screen support for the Epomaker RT100 Helps to make sure that the USB C does not get damaged when having weight put on it from above.
Seeed Studio Sensecap T1000-E charging cradle/puck with magnet attachment
Print front down, with supports (for cable peds mainly. Use tape on the from to secure to surface for use. Includes post for winding excess cord. Designed in Onshape:…
This is an update of my printable Blue Robotics Thruster intake guards for use with the T100 and T200 thrusters. The origional guard offers slightly less drag, but is weaker and more difficult to print. These guards are strong, can be…
The handle is suitable for the Makita table saw MLT100, but likely also for other tools with a similar handle (M8 bolt attachment). The used bolt is 8x50. In contrast to the original, this version of the handle has a cap, under which it…
Werkzeug zum Zentrieren der Kupplungsscheibe für VW , Skoda, Seat, Audi 2.0TDI Motoren. Original Werkzeugnummer T10097 Datei darf nur für die Eigenanwendung gedruckt werden nd nicht für den Verkauf!!
Here's the CAD I used to create my The 100 . I tried to repurpose a lot of an Ender 3 V2, including the bed, mainboard, and steppers. Because of this, I had to make some changes to the design to suit my needs. I hope that other people in…
Half height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
A FDM printable friendly cap for a 360 prism (MT1000 360 prism or simialr) to replace or repair missing or broken caps. Simply screws on like the original. The FDM printed thread is tight, running it back any forth a few times will…
Remodeling of the Corsair Smart Tower kit LT100, compatible with iCue, modeling not finished but I share my files with you to improve them. To create the towers, you will need: PLA (naturally) Black or Other and white for the bottom band…
BOM: 24x M3 Brass Knurled Heatset Inserts 20x M3 8mm SHBC 6x M3 18mm SHBC Optional Double-sided tape between frame and uSDX and AT100
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…
DN100/HT100 to DN50/HT50 adapter. Included a small spacer, if your DN100 port is not exactly 100mm. EDIT 16.02.2021 Reuploaded the files with better .stl's (more vertices). Now it's really a round thing! Category: Hobby
A first attempt at 3d modeling cloud strife cosplay pieces. This is a first 3d modeling test.
The first model didn't allow the charging pins enough clearance, so I uploaded V2 to replace it. Once that worked I translated the opening on to DevoCut's remix for the same effect. Print this vertically with a brim and it will come out…
Full height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
The Seeed Studio T1000-E is an incredible device. Compact with fantastic range and built in GPS and other sensors. But it can be so much more when travelling. Here is an aerodynamic magnet case to securely affix your T1000-E to the roof…
Case for E3d PT100 amplifier. Print instructions I used PETG, but can be printed using anything. Board simply encased between both halves. Board placed on half with pins, and the other half with holes simply closes on top. Print as is.…
A better holder for Xiaoimi Mijia T100 electric toothbrust I decided I make my own holder for Xiaomi T100 electric toothbrush. So far I have used another one but it was unstable, it was designed with very thin parts. It broke when it fell…
🇫🇷 Français Titre : Étui SenseCAP T1000-E pour collier de chien 🐾 Description Cet étui monobloc accueille un SenseCAP T1000-E (nœud / tracker Meshtastic) et s’enfile sur un collier de chien : le collier traverse l’ ouverture arrière de…
Webasto T100 remote control holder Category: Organization
Used the moneyclip from this model https://www.printables.com/model/1034675-slidewallet-v2 and the holster from https://www.printables.com/model/1070854-holster-for-seeed-studio-t1000-e-meshtastic-tracke All praise for the modeling goes…
T1000 police badge
This is a model of the KingKong ET100 propeller. I ran out of props during quarantine and shipment is on its way for 2 months already so I decided to attempt to design and print some myself. I only uploaded one side of the props so if you…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional
Be Warned: I'm neither a motorcycle mechanic nor an electrician, so modify your bike's electronics at your own risk! This is an alternative to the stock fuse cover for the Triumph Bonneville provides the extra height and wire-out hole…
Brackets that allow for Creative T100 Speakers to be mounted under a desk, horizontally.
A crudely crafted charging platform for the Seeed T1000 Trackers. Simple OpenSCAD file included. Would be nice to chamfer and fillet some edges in the future. The plaform securely holds the charging plug and cable. When the T1000 is laid…
A simple remix of the Molle clip and the T1000-E case allows the tracker to be easily attached to Molle attachment points and taken along.
E3D PT100 AmpBoard Snap Case and Mount This is a snap case for the Amp Power Board for the PT100 Temperature Sensor No supports. There is a post and back for attaching to the wire routes for the YZ Case (Einsy Rambo Board) for the Prusa…
This is a catch for the rear sliding window of a Gen 1 Toyota Tacoma or T100 Pickup. There are other files for the large latch but none had the catch side (which I was missing). This includes the outer mount, a gasket and the catch. The…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended. This stand is for all Helix Compose…
This is a replacement fuse cover for a 2011 Triumph Bonneville T100, which is the same size and shape as the original, and is held in place with the original tabs. It should probably fit any EFI T100 or SE, but it might work on other…
edit 18 mar added jack_stand, a simple stand that clips into holes underneath and raises the tracks off the ground for debugging motor code without taking off. added photo with track_top fitted edit 10 mar added track_top, plate over tops…
V2.0 is now online on the website. ENGLISH More informations : https://lebois-racing.com/category/motion-rigs Which PLA to use : https://lebois-racing.com/the-plastics-for-3d-printing FRENCH : Plus d'informations :…
This was my first attempt at 3D modeling, I bought the BIQU terminator extruder and while the included mounting brackets are beautifully machined, they are designed for Voron style printers. This plate should work with most Ender 3 and I3…
Small Stand for T12and T100 Solderingtips.
Simple guide for the center vents of a toyota t100. Heat and years cracks the original one to pieces. So this one is the same assembles like original. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
This is a mount for ebb42 to terminator without drilling. Holes in the model are tight. tap'em if needed. PETG is fine. Use included spacers. pancake cables are too short for most of the places. EDIT: new model with a place for ziptie.…
*** DO NOT ATTEMPT IF YOU ARE NOT COMFORTABLE WITH SOLDERING AND HIGH VOLTAGES *** Description After building and tuning the T100 V1.1 to around a 5 minute BSO, I now want more. This mod is my attempt at ultimate speed. This mod is…
This is the same tracker holster as made by Alley Cat, but I made a cutout so the tracker can be charged in-holster.
The peanut style linkage mechanism allow you to stick multiple of them together, handy for charging multiple T1000-E cards at once. You need two peanut connectors for each connecting edge. So for two chargers you need two connectors, for…
The charging cable for the SenseCAP T1000-A & T1000-B trackers doesn’t hold securely enough, so I created a docking station where the connector and charging cable are held in place. At the back of the docking station, excess cable can be…
Ich habe hier für meine Makita für die Führungsnuten Einsätze erstellt. Sie passen nahezu ohne seitliches Spiel in die Führung. Höhe ist bündig. Im Anhang gibt es verschiedene Step-Modelle mit Bohrung und ohne. Das Fusion360 File ist auch…
Not for printing, but for use as a reference model (for space claim, making compatible designs, etc.) Includes recesses for charging port, button, and LED position. For more information on this product, see :…
This model allows you to mount your Sensecap T1000E to your dog's collar. This makes for a great pet tracker. While it's easiest to print flat, angled printing will provide a much stronger print.
If you have the courage to void your warranty and open up the T1000-E (very well glued and epoxied) case, this is a new case to add USB-C. I've found that heat gun + slow prying was the best approach to opening mine. The end result is…
Case for SenseCAP T1000-E Meshtastic Radio by Seeed Studio
The slot in the t1000e is not sufficiently large for paracord. So I made this simple loop so I could hang the t1000e from my backpack with paracord. I printed the example in the photos using PLA. I held it in the heat gun for a few…
I had a couple of Asus T100A tablets just gathering dust so i figured I could repurpose them as a digital photo frame. So I designed this stand to not only hold the tablet up at a partial angle, but to also conceal the charger plugged…
Tapo T100 Support Remplacement
Was tired of carrying the charging cable for my SenseCAP T1000 and figured i can make a stand that i can keep at the office, bedside and what not. I also didnt like the cable only used usb 5v so this design makes it where you can use usb…
All elements are printed in PLA, apart from the gasket which is TPU. You could use silicone sealant to make a seal if you don't have TPU - just remember to pair your device to your hub before you do. If you use white or light PLA, the…
I made this battery cover for the Midland GXT1000 for my colleague. As shown in the video, you have to carve/file a little bit so the clip of the walkie-talkie can get over it. I can't modify it, as I don't have the walkie-talkie in my…
Since there are no ways to mount these speakers, this bracket follows the shape of the speaker and is intended for permanent tape or glue between bracket and speaker. The L shaped bracket has a 95 degree angle and should work for…
Has a bottom ledge and a lean towards the wall if used vertically, magnet on connector makes it sit in nicely with no need to remove the standard clip for hanging on belt loop, lanyard without keys holds in quite well also. Back cap uses…
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 3,5 hours. (with MK4 input shaper feature enabled) Slicer settings: 0.2mm layer height, 4 perimeters, 40% infill Post processing instructions: Check…
Smaller case for Teltonika FMT100. I used inner threads.
recomended a tuff resin but a normal anycubic one should work
I built a The100 printer, but couldn't find a model or template to use for my serial number plate. The .3mf file has a text layer to be edited with your own serial number, the backing plate is sized to affix on the Top Front Left frame.…
ENGLISH Allows to install a anti-vibration foot on SRT100 and OpenSFX100 actuators. You can secure the adapter with 8, 10 or 12mm wrench, or a small allen key (small hole at the top), to screw the foot. Then use an hammer to press the…
Recently, I got a thermal camera that I've been using frequently, and I quickly realized that the front lens is quite prone to scratches. Unfortunately, I accidentally put a small scratch on the lens, which made me realize I needed a…
Print it at .2 to make sure the fits the snap, otherwise it should not require any supports. SenseCAP Card Tracker T1000-E for Meshtastic on SeeedStudio.com
I wanted to be able to mount my T1000-E to my Multiboard, so here we are. Supports are necessary.
Suports per a col·locar una fotocèl·lula i proteger-li de cops. Serveix per a fotocèl·lules SICK WT100 amb connector recte o de colze, també hi ha un stl per a col·locar-la a 30 graus.
