1 / 4
Magnetic Hammer Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic Hammer Holder
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Servus zusammen,
anbei die .STL für einen magnetischen Hammer Halter.
Druck aus PETG, Infill 15 %
Breite Hammerhalter: 38 mm
Tiefe Hammerhalter: 30 mm
Rückseitig sind drei Löcher für Magnete eingebracht: Ø15 mm s = 5 mm
Ebenfalls habe ich eine Anti-Rutsch-Folie aufgeklebt.
Hey guys,
attached you will find an .STL-file for a magnetic hammer holder.
Made of PETG, Infill 15%
Width Hammerholder: 38 mm
Depth Hammerholder: 30 mm
On the backside are three holes for magnets: Ø15 mm s = 5 mm
I applied an anti-slip-film aswell.