1 / 2
European 4-1 Chainmail (400 rings)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
print-in-place chainmail
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 165
- Makes
- 0
- Views
- 764
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Share Alike
print-in-place chainmail for props / cosplays
0.2mm layer height is recommended. Supports are hand-modeled in the STL, so do not enable supports upon slicing. It prints fine with Bambu's default 0.2mm configuration.
When printed, ply off the bottom sheet first, then remove small pillars left attached to the chainmail. Removing support pillars requires quite some time as they are so many, but most indivisual pillars should be able to be snapped off.