Covert Instruments Bump Key Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.94 – €1.15 net (excluding VAT)
For file: Key_Box_Standalone_Tight_Lid_0.4n_0.2mm_PLA_COREONE_34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.05 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 34.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cases to hold the bump key set from Covert Instruments
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 59
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a case to hold the 7 key set to keep the keys easily accessible, and a key ring was not working.
- There is a standalone case to hold the 7 keys and 2-3 rubber rings. There is a tight fitting cover that works well if you have a printer with good dimensional accuracy, and a looser cover if not. If you split the case to parts in your slicer you can delete the key post if you are worried about it breaking since it's thin, but I have not had issues with it.
- There is also a “backpack” style that clips onto the bump hammer. The “backpack” style need to be printed on it's head with supports. The case has worse dimensional accuracy in that orientation so there is a dedicated cover with more clearance.
Printed in PLA, and using tree supports. Structural profile may work best so the tree supports with the “backpack” style are less prone to getting knocked off. The standalone does not need supports.