95 models
I wanted a case to hold the 7 key set to keep the keys easily accessible, and a key ring was not working. There is a standalone case to hold the 7 keys and 2-3 rubber rings. There is a tight fitting cover that works well if you have a…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This stand is designed primarily for the Texas Instruments Nspire line of calculators, but it will accommodate any Texas Instruments calculator with a thickness under 22mm. You can also scale the model, leaving around 1mm of tolerance on…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
In addition you need 3 screws M4x40 DIN912 and some stripes of flexible selftapping isolation (10 mm thick and 75 mm long).
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
I have been using these handles on my CI and MP picks and love them. Got the Reaper set and decided to modify them to fit it. They should be a snug fit and go on about 50% freely. Once u hit that spot use a lighter or hair dyer to warm…
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
I wanted a case to hold the 7 key set to keep the keys easily accessible, and a key ring was not working. There is a standalone case to hold the 7 keys and 2-3 rubber rings. There is a tight fitting cover that works well if you have a…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
I bought a set of 10 needle files, and also got a needle rasp, and wanted to hold them all up. They were narrower and I use them less than my screwdrivers, so I took inspiration from/modified my other screwdriver stand: and crammed them…
This will Fit most Mixers with a 53mm crossfader, including the Pioneer DJM-900 Series, and the DDJ- SZ and SZ2 as well. (
Introduction: I f you decide to learn to locksmith, ( and I suggest you don't ), you will likely encounter many small microscopic parts that attempt to dissappear into the ether right before your very eyes. They are there one minute, and…
This is a Ti-84 plus C graphic calculator made by Texas Instruments in 2013. It looked interesting so i decided to recreate it. The text might not be visible unless you have a multi-color printer (obv.). It has no butt, would've made it…
This multi-holder attaches to any solid base using a standard clamp. Its use will make it easier to organize a workplace for repairing and setting up electronic equipment in any place, even the most inconvenient one. Rubber gaskets must…
I have been using these handles on my CI and MP picks and love them. Got the Reaper set and decided to modify them to fit it. They should be a snug fit and go on about 50% freely. Once u hit that spot use a lighter or hair dyer to warm…
A riser that will nicely fit under your M32 so you can fit a full size keyboard underneath. Secure the riser with some tape using the lip. Print a pair obviously :)
Simple organizer for instruments (keys, screw driver, clog removing pin) I use with Flashforge Guider 2s which can be placed inside the Guider 2s. Don't take place, instruments are available right on place.
UPDATE: Added a pegboard version of this mount using Sy's Peglock System design. I picked up an AMES Instruments 12:1 infrared temperature gun from Harbor Freight (the $22 model) and couldn't find a stand or holster for it so I designed…
Bajonet NIKON/T2 pre CCD Moravian Instruments, distance 9, 10, 11 mm
I received my calc without cover so I made one. I have no idea what the original looks like and what features it has. Sorry. It has integrated supports for the slide in side of 0.4 thickness so you need to turn on single extrusion width…
Comfortable grip for Covert Instruments Echelon picks. Uses inexpensive 8x2mm magnets to snap onto sides of pick. Print one for each side and press-fit magnets, possibly with a drop of CA glue. Magnets: https://a.co/d/2O5zYB5
I wanted to make a dulcimer-like instrument, but commercial mechanical tuning pegs were too expensive for me to buy like 64 of them; So I made this thing! Design and Objectives It is a simple worm gear-spur gear system that prevents…
These part replaces the two briggs from the dashboard for the instruments. Print Settings Printer: Prusa i3 MK3S (MMUS) Rafts: No Supports: No Resolution: .15 Infill: 15%
These are simple clips intended to help keep surgical instrumentation jaws open during sterilization, based on some existing clips I saw at a previous job in central sterile processing. The included .scad file allows you to edit the…
This is a front cover for a Texas Nspire model of calculators, in case you scratched, lost, or broke yours. There is also a STEP file of the model here if you want to customize it with logos or anything else your heart desires. Feel free…
This is a stand and dust cover that combine into a case (similar to the original Kontrol Stand). The stand brings the controller up to standard mixer height (such as Pioneer DJM mixers). It will fit the Traktor Kontrol X1, X1 MK2, F1, and…
I needed a replacement cover for a TI-89 Titanium edition that I was selling on Facebook marketplace, so that the buyer would be satisfied. Luckily, I had another TI-84 calculator that still had its original cover so I could recreate one…
Print on the side with support on buildplate. Tested with PETG. Requires an M4 thread insert (5,1mm × 6,3mm). Put a thread on a 4mm x 4mm brass bar. A knurled nut M4 can be used as lock nut to allow easy adjustment. The brass bar will…
In English below. Ich habe das Gehäuse neu designt, da es nur für das CC26X2R1 Board zu groß war. Weiterhin habe ich die Öffnung für die GPIO Ports entfernt, welche als Zigbee Coordinator nicht benötigt werden. Um die GPIO Ports komplett…
This design is an add on to motorize a RWD stereotaxic manual instrument and drive it with a servomotor. I designed it to allow slow and regular probe insertions. It adapts to the stereotaxic arm, holds with two screws and can be easily…
- replacment dampers for the instruments - slicer: Cura - printing material: Generic TPU Nozzle 220°C, Bed 50°C - printing orientation: flat, not supports
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
I designed this Covert instruments Companion MOD to hold the Riv/Rizz pick, the Gravpick and the set of turning tools from the Reaper lock pick set by Mcnally. I originally designed V1 about 10months ago to hold the Riz and Riv picks as…
I needed a way to attach my clip on metronome to my tenor sax. Most saxes come with a small hole for sheetmusic holder for marching. I have designed this small holder so that the hole can be of use - this way the metronome is close and…
I have a Fender 5 Space Foldable Guitar Rack with my guitars and basses on it, but I also wanted to include my Mandolin for easier access and safer storage. I just printed in PLA and oriented the print so the extrusion arm is face up for…
Description and Design Goal: Regular flashdrives are boring. Originally, this was created with the intention of storing rhythgame songs. This shroud is designed to fit the 128gb/256gb Amazon Basics flashdrive (I have not tried this with…
The seal is made from ColorFabb Varioshore. I set the print parameters to make it as soft as possible for the best sealing effect. It has been in use for over a year now, has only slight pressure marks, and still seals perfectly. Even…
I bought a set of 10 needle files, and also got a needle rasp, and wanted to hold them all up. They were narrower and I use them less than my screwdrivers, so I took inspiration from/modified my other screwdriver stand: and crammed them…
This will Fit most Mixers with a 53mm crossfader, including the Pioneer DJM-900 Series, and the DDJ- SZ and SZ2 as well. (
I made my own from PETG - 5 perimeters, but other materials will work also fine. You need four pieces for single instrument.
This is designed for use with Felix Instruments produce quality meters. It is used to mark an outline on a fruit prior to scanning. This can be useful if you want to scan the same area multiple times or sample fruit from the scanned…
Store your wind meter in its own screw-top case. Pot created with the Parametric OpenSCAD model from Der-Da (thanks).
Hello, i designed a simple pin organizer for the pins of locks. Enjoy :)
The original model didn't quite fit properly, though I suppose I didn't understand how to use it. So.... here's a new version! Thanks Mr. Lurch. Category: Electronics
Peg Board holder for Sharpie, Pencil, Carpenters Pencil & Pen Printed in leftover PLA I had (Don't mind the pink :)) Print with supports touching buildplate for pegs. Print in orientation shown. .16mm Layer Height with 25% infill. If you…
Flat wall mount for Soundinterface Komplete Audio 6 from Native Instruments. Flache Wandhalterung für das Soundinterface Komplete Audio 6 von Native Instruments. Needed materials: 4 x M3*16 screw/schraube 2 x M4*20 screw/schraube 2 x…
Measured with calipers, actual plug for replacement.
This is an upgraded back for the TI Programmable 57 calculator. With an original MSRP of $40 in 1977 (over $200 in 2022 equivalent buying power), the TI Programmable 57 calculator was designed to use 2x NiMH 1.5V batteries connected in…
You should adjust the Z of your model depending on the material you use, it should bend but not too much, we found that 2mm was the minimum to be safe!
A glass front for my Flight Instruments to increase the realistic effect. UPDATE 2022-12-24: Larger screw holes Ø 79mm x 0.2mm transparent foil needed. Fits to: Variometer for Flight Simulation Airspeed Indicator for Flight Simulation…
I recently bought the " Learn Lockpicking Bundle " from Covert Instruments. It comes with a repinnable practice lock and several basic lock picking tools, but no case for everything. I designed this case to fit everything including the…
A simple box, with cover, that I created to store the pins and tools for a lock picking hobby. It has 4 smaller compartments for parts and a longer one for tools.
Four Part stand for the Native Instruments - Maschine MK3 This model does require some assembly and uses “Heatsets" as the threaded inserts holding the parts together. It's designed to be quite robust and has a 23deg angle for the…
Here is a remix of the altimeter desk clock, including a tilted version, or with magnets, and also extra faces/needles (Airspeed and Heading indicator), with MMU compatibility if you have it (use faces with “MMU Only” and split them to…
This tuner should be printed with high infill for optimal durability.
Parts for retrofitting 3D color instruments from VW into Skoda Octavia 2.
This is a print-in-place model for a small carrying case for the Covert Instruments Covert Companion. It fits the Covert Companion with Turning Tool Expansion Pack with plenty of room to spare for more expansions or foam to keep it from…
Having an air-guitar is fun but what if your friends want to get involved and start a band? You need more than just a couple of guitars! With this file you will be able to print off air Bass guitars, air drums, and using a secret AI…
You can tune and soften the soundresonance with snowflakes from Oxa! I use this for the beautiful melodie snowwalz from Johann Strauß! https://youtube.com/shorts/lxx9WU_wVQM?feature=share Please look also for my new bigger 210mmXYZ…
I received a Texas Instruments Datamath 2500b that was missing the brand/nameplate. So I made one :)
notes: Tools are press fit but easily come out The lock is loose because it is not press fit and just sits on the peace.
I built this two-part case for my midipal. It screws together using 4 M3 screws. It fits very well, the screen cutout could be made 1mm smaller. I used through hole leds, but the smd leds should also be visible through the holes. The…
I'm sure it'll work for others, but I specifically designed it around the dimensions of MY TI-84+
A Riser for your MaschineMK3/Plus to level it up to a Mixer like the Traktor Z2 Split into four segments to print it on smaller printbeds, eight M6 Bolts and Nuts required for assembly, leave some room to breath.
The image is prepped using the HueForge software Using PrusaSlicer, I performed the color swaps at these layers: Brown to layer 0.50 mm Light Brown to layer 0.60 mm Egg White to layer 0.95 mm
On my Bambu X1 with PLA I printed it with the hole facing up. I modeled this to make it easier to hold the Covert Instruments tubular lock that came as part of the tubular lock picking bundle. The lock slides into place and will be held…
I have two Sperry outlet testers, but the lens broke and I could not find replacements. This model is a replacement lens. Use a transparent filament. All I had was a transparent blue PLA, but it seems to work just fine.
The Traktor Kontrol F1 is a micro DJ controller dedicated to controlling Traktor Pro’s “Remix decks”. As I’ve gotten one of these puppies just recently, I knocked up a stand for it. It’s 3 seperate parts, printable on smaller 3D Printers…
Introduction: I f you decide to learn to locksmith, ( and I suggest you don't ), you will likely encounter many small microscopic parts that attempt to dissappear into the ether right before your very eyes. They are there one minute, and…
The case for the Mutable Systems Ambika Synthesizer can be printed on a standard 3D printer with a minimum bed size of 25x21cm. Additional to the 3D printed parts only following items are required: 4 pcs. 3mm (Eurorack) square nuts with…
I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…
My old Logitech Keyboard was a little to high to use the NI M32. Does not need any glue, maybe some bumpers underneath, but not necessary. Enjoy
Print on the side. Tested with PETG and PLA. Requires an M4 thread insert (5,1mm × 6,3mm). Put a thread on a 4mm x 4mm brass bar. A knurled nut M4 can be used as lock nut to allow easy adjustment. The brass bar will then clamped in a…
This model will support the NI Maschine Mikro mk3 on your desk, holding it up at a 20-degree angle in order to better see the LCD screen and buttons, and also making it a little more ergonomic for finger-drumming at arms-length. The…
To make the electrical contact between the different battery slots, it's necessary to insert 2 paper clips at height 11.2 mm. This pause is included in the 3mf file. Holes in the body allow to test the electrical voltage path along the 3…
a handle for the covert instruments practice core to be held in your hand. must be imported as imperial not metric.
Covert Instruments Practice Lock holder for Gridfinity system. 1x1 by 5 units tall. You can pick with it in the holder if you'd like, there's fins so the lock body won't rotate, but this was made with storage in mind.
Place this cover over the bottom instruments on your NT 1100 to reduce glare at night if you find it distracting.
I made this holder for the Covert Instruments lockpicking practice core, because the core is not very comfortable to hold in your hands. This print should make it much more comfortable. I made two versions; one is slightly shorter so you…
