1 / 2
Water key seals for instruments like a trumpet — image 1
1 / 2

Water key seals for instruments like a trumpet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The original cork on the water key was badly deformed and no longer sealed properly, so I designed this set of water‑key

Rating
0 / 5
Likes
3
Downloads
15
Makes
0
Views
133
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Noncommercial

The seal is made from ColorFabb Varioshore. I set the print parameters to make it as soft as possible for the best sealing effect. It has been in use for over a year now, has only slight pressure marks, and still seals perfectly. Even though I had doubts at first, the printed seal has proven to be a better choice than the usual cork ones.

In case the water‑key seal ever fails during a gig, I printed a little seal kit so I can replace it or help out a colleague.

Settings for ColorFabb Varioshore:

Parameter

Value

Extrusion Multiplier

0.65

Material Density

1.22 g/cm³

Idle Temperature

70 °C

Nozzle Temperature

First Layer: 250 °C

 

Other Layers: 250 °C

Bed Temperature

First Layer: 80 °C

 

Other Layers: 80 °C

Print instruction:
  • material: flexible filament

  • supports: no

  • layer height: 0,2mm ... 0,3mm

  • nozzle diameter: 0,4mm or 0,6mm

  • brim: not required

  • enclosure: not required

Tags