1 / 2
CGS Lancer mag gasket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for a stock gasket
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If for whatever reason your gasket got damaged and it's hard to source a replacement, you can print this out of TPU.
0.15mm layer height is recommended. I used a soldering iron to smooth out the top surface. I shot ~100 BBs so far and everything seems to be fine, further testing will be done in the field.
I also tested a “High Flow” version, no noticeable difference, so I decided to use the standard dimensions as it will be a bit more robust.