Counting matching models…
This is a remix of TheForrestFire's card trays that they made for the Lord of the Rings LCG. I own the core set for Marvel Champions, but don't have enough cards to even fill one side of the box using those trays, so I wanted a version…
A 10-slot angled rack for quickly sorting Magic and other TCG cards (63x88mm).
These are some simple card stands for Arkham Horror:TCG and Marvel Champions LCG that have additional slots for tokens from Buy the Same Token, which is my token manufacturer of choice. This is perfect for doom tokens or threat tokens.…
Made for a Voron 2.4r2 build with power inlet socket with 1.5mm spacing. Mine is bought at FermioLabs Skirt is mounted on the left side at the back of the machine (when looking at it from the front)
22.08.2025 - Added shorter nozzle attachment spring parts (-1 and -2mm) which will allow to adjust the Joules output beyond stock limit, but be careful with gas efficiency/cooldown. Also, a tapered nut to be used with hammer assist.…
These are some simple token cases for Arkham Horror:TCG and Marvel Champions LCG that have slots sized for tokens from Buy the Same Token, which is my token manufacturer of choice. I use the 4-slot cases for investigators and the 5 slot…
Simply needed a slightly deeper tab depth for my 2.0mm power inlet. The originals both have a .1 tolerance, so I increased the tab depth to 1.9mm. Hopefully it's useful for someone else using the same type of c14 inlet.
Made for use with an appropriate Skirt Insert . Mirror for use on the opposite side. Print using standard Voron settings : Layer height : 0.2mm Extrusion width : 0.4mm, forced Infill percentage : 40% Infill type : grid, gyroid, honeycomb,…
3D print the endcap for lightweight bolt to increase ROF or to get better winter performance OR make the heavy endcap from steel/brass and enjoy increased kick/recoil!
Mod for frontpanel from here: https://www.printables.com/pl/model/428500-tridender-skirts-for-ender-3prov2/files to fit power socket like this: so - you can mount this “front panel” on back of printer too, with power inlet, have nice…
Disclaimer: Use at your own risk as you will be hammering this to get the ECGS bushing in. I had success printing with PETG at 100% infill and using a socket to hammer the backside of this print to get the bushing in.
The text represents the "Canadian Coast Guard Ship Terry Fox", which is a heavy icebreaker. I've included a version with the text and one without.
https://eastcoastgearsupply.com/i-8536125-toyota-8-clamshell-bushing-eliminates-needle-bearing.html This alignment spacer makes pulling the needle bearing much easier. no more wondering if the tool is aligned correctly.
If for whatever reason your gasket got damaged and it's hard to source a replacement, you can print this out of TPU. 0.15mm layer height is recommended. I used a soldering iron to smooth out the top surface. I shot ~100 BBs so far and…
Key chain for longboard fans in shape of wolfshark board. Print instructions Do not forget to set up colorchange
I wanted to try out the Metal 3D Printing service from JLC. I've redrawn the hammer assist, which is used to short stroke the gun. It turned out to be quite fine, although you need to drill, tap and file the printed part, because fine…
Original model used sockets for seperate power socket and switch. this is for people who use iecgs unified socket/switch. i didn't make it for the 1.2 since i hsve a 1.0 if there is enough demand i may make it for the 1.2 that is the…
Voron 2.4 LDO Kit rev D - power inlet IECGS 1mm
This was designed with the BCW shoe-box in mind, which may or may not be the same size as you need. My recommendation would be to check the width and length of your particular box and make adjustments in the card organizer file. The…
These sleeves have a terrible habit of falling out and disappearing. GE does not supply replacements. The only option is to purchase a new knob for $60+. This sleeve will likely fit knobs for most GE stoves manufactured during the same…
Skirt Insert remix for my open-backed Power Inlet IECGS Side Skirt remix . Mirror for use on the opposite side. Print using standard Voron settings : Layer height : 0.2mm Extrusion width : 0.4mm, forced Infill percentage : 40% Infill type…
A ADD FOR Voron 2.4 Skirts with Hex infill. 250, 300 and 350mm sizes MOD,CUT 2.2MM
If you have a Gen1 CGS or just are doing some mods, building new replica or whatever, this could be useful. I shot only few mags using this part but it seems to be working fine. It is important to note that due to overall design, this…
Easy to print deck box with various options for lids for your favorite TCGs. Also included is a plain lid to use with any game. Box is designed to hold a standard 60 card deck with sleeves.
Trading card stand. The lid is held in place with 6x1mm magnets when not in use, but the model works well without them. I suggest adding two rubber feet to the front of the scanner but not in the back so you can easily position the stand…
This is a tool (wrench) for the rear endcap of a CGS Hydra. I was never able to grip the rear endcap when the Hydra was installed. If I tried to unscrew the Hydra, I always ended up unscrewing the tube and leaving the rear endcap (which I…
