1 / 4
Bike lock support
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to fix your U shaped bike lock on your saddle tube
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 106
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
Here is a Design for a bike lock holder.
The idea :
- You mount with nuts and screws one of the part on the U shaped bike lock. I made 3 sizes so you can choose the best diameter (16.6, 18.6 and 20.6mm).
- You mount the other parts on the saddle tube. To make sure it does not move, you have 2 more parts that you can lay on the saddle collar. Then you press the support on it. And finally you should have put a nut and a screw in the specific hole that will allow you to exert pressure. (Pro tips, do not screw too tight, and add a bit of gum/silicone/similar on the tip of the screw to avoid getting loose)
- Use the support by sliding it in and out
You will need material that you can't 3D print to build it
- 3 classic M5 screws (1 M5 16-20mm and 2 that can be shorter)
- 3 classic M5 nuts (usually 3mm thick, and 8mm large)
To guide you while mounting I've put a sliced view of the model
I recommend using PETG as there is less creep and it is stronger. Bike locks can be heavy so don't hesitate to put some walls in there (I've used 4)