Birdfeeder "Beehive"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Birdfeeder inspired by an Beehive
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
A birdhouse inspired by a beehive. It consists of four parts in total and was designed to maximize the build volume of my printer, which is 256×256×256 mm (Bambu Lab P1).
The parts are as follows:
A base plate with holes for water drainage.
A main body that serves as a container for birdseed (also with ventilation holes).
A lid/roof.
An end plate through which the wire cable can be threaded, allowing the birdhouse to be hung.
The only additional parts needed are:
a rope (maximum diameter 3 mm).
Sticks with 5 mm diameter and approximately 40mm length.
I glued the base plate and the main body together – although they would probably also hold just by gravity.
Feel free to improve the model and/or give suggestions.