1 / 3
Box for Battery Discharger - Aokoda
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The design ideia is from emeraldmeadows (https://www.thingiverse.com/thing:2419239) i just made some minor improvments.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The design ideia is from emeraldmeadows (https://www.thingiverse.com/thing:2419239) i just made some minor changes to the concept.
The holes in the box and lid are tight enough to use a tap. I use M3 screws for the box and M2.5 for fixing the ceramic sockets to the LID. You can also use Nuts if you prefer but you need to drill open a bit the holes.
The discharger in question is this one:
https://bit.ly/4eAK29U
I recommend printing this box in ABS/ASA.