1 / 4
BeamCase folding feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple magnetic folding feet I made for my BeamCase.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A basic foot folding foot I made for my BeamCase.
You will need:
2x Bracket
2x Foot
4x Stopper (optional but recommended)
4x M3x16 countersunk bolts (same as used in the case) (Slightly longer and shorter should also work)
4x M3x8 countersunk bolts
4x M3 square nuts
8x Magnets (optional)
Some glue or epoxy for the magnets (optional)
Assembly:
- Slot the magnets into the slots and glue them in
- Push the M3x16 bolts into the brackets and through the feet
- Hammer in the stoppers
- Pre-load the M3x8 bolts into the brackets with their nut positioners
- Slide the feet onto the rails and tighten the M3x8 bolts