Kawasaki H1 Air Cleaner Adapter Cap H1 A/B/C/D/E/F KH500 11012-011
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap together top cap for the factory airbox. Made for K&N style filter, may work for others. Can tweak if needed
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
About
Not an exact match for Kawasaki Part Nr 11012-011 as I didnt have an original to work from, but this allows for the commonly circulated K&N style air filter. I didnt plan on getting the whole canister assembly, but wanted to make sure the filter stays put.
The filter used is here: https://z1parts.net/h1-500-kh500-a8-air-filter-high-flow/
I made a lip on the inside that the filter clips onto and it works pretty well.
If you need an adjustment for a different filter I can model it.
I might make a version with a shield in the front to keep dirt from blasting directly
Talking with some others from the Triples community; if I understand correctly, the original K&N filter worked perfect, but these Taiwan repops do not. Here is the measurement for the filter this is based on.


Printing
You should probably use PETG or similar, but I think it is shielded from the sun and stays cool enough to survive for a while as PLA.
I suggest printing at a 45 degree angle. this will require supports on the model and build plate, but its much much less than if you printed flat.
I enforced support for the first 25 layers but may not be necessary.
Its thin so infill shouldnt matter. Just make sure it prints solid. If you try this model please share your results.