660 models
I modified my Humvee M998 into a civilian version. I made some tweaks and improvements to the model, added more details. I also made the axles thicker. I printed it using PrusaSlicer organic supports so it wouldn't be as messy near the…
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Remixed - original can be found here: https://makerworld.com/en/models/822000-polar-h10-storage-box
Extended Upright for Sennheiser HH10 Headphone Holder , adapted for use with tabletops thicker than 1.3" / 3.3cm. Also confirmed fitment with Auray COHH-1 , and may work with other clones. Works with tabletops up to about 65mm in…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this…
[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…
[3 Dec 2025] – Second Version V2.1 - Heltec V4-compatible cases added This H1+ case is a remix of the original H1 case design by muzi.works and reworked to, as the ‘ + ’ in the name suggests, accommodate a further enhanced Heltec V3/V4…
Modeled in Fusion 360. Based on Tiger 131 at the Bovington Tank Museum. 2 versions of the tank are provided, one with the feifel air filter system attached, and one without them. The Tiger I was a German heavy tank of World War II that…
Featured in 3Printr.com ! When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for…
muzi.works' [H1 - Case for Heltec V3 running Meshtastic] is a great design, but my battery couldn't fit in it, so I remixed its case. If you are like me and have trouble with the battery being too big, you can consider it. This case is…
This is the H1+ case modified to fit common 18650 batteries and with added compatibility with the newer Heltec V4 module. Similar to my previous model. Made with the request of and help from: @JLO_2137313 Also added separately printable…
Remix of H1+ case for Heltec v4 with space for 2 x 18650 batteries in two versions - with lodgement or without it. Based on version for antennas up to 15mm in diameter at the base. Needs 2 M3x12 if you planning to use clamp. Best to use…
Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.
UPDATE: I took out the lump because it wasn't really needed and gets in the way of most lanyards and some mods. Added a version that works with M2.5 nuts for the Baofeng clip. I based it on the style of the holsters for my Alley Chat HT…
No support required, recommend 0.15mm layers or less. Maybe slide the horizontal stab all the way through the holes one sides at a time to make sure it fits. Put heavy things in the inside hidden square holes, nuts&bolts, metal, etc to…
Original model for the Heltec V3 by Muziworks: https://www.printables.com/model/741974-h1-case-for-heltec-v3-running-meshtastic This is a modified version of the original H1 case by Muziworks. I wanted to play around with a Heltec V4…
kit card of the EC 135 (Airbus H135) helicopter model. you can choose any color you want, it's up to you. the composition of the model is very simple and you can do it according to the photos. Enjoy printing and sending your creations.…
This is a bracket to mount a HEPA filter to the Creality K1 and K1C at the rear fan exhaust. I take the cheap Levoit LV-H128-RF. You can get it on Amazon and Aliexpress.
Remixed from V1.1.1 Original design is epic - but the weird grip on the side and all the text felt really distracting for such a small case. Updated 2024/04/17 to add space for the screen - should help prevent cracking but no guarantees -…
Comes in 4 pieces, split STL to objects in prusa slicer. There's a 0.5mm gap between parts; mask back panel, snap pieces into back panel, and fill gaps w/ JB-Weld or similar. This is to allow everything to fit on the bed and account for…
Designed a couple grilles for the H10 optic. I printed them in both asa and pla and they both printed out great.
As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…
As previously stated, it is just a little case for the SSH1106 OLED. Uses 4 M3 nuts and bolts to hold it together and provides quite a bit of protection. (they might be m2 thinking about it…) just print it with the face down if you want…
See changelog to see all the updates and changes I did. __________________________________________________________________________ Original Muzi text for his Original H1: Case for the Heltec V3 Lora board. Recommended to print in a Matte…
Print with 3 perimeters for stability Use 4x M3 Threaded inserts, outer diameter 5mm, length 4mm: https://s.click.aliexpress.com/e/_DmG9Lyz
Cup to hold H11 55W lightbulb. Can be used for load testing of automotive or other 12V circuits. The cup prevents bulb burning your hand or car interior while testing. There are small holes in the cup wall to allow better visivility of…
The Hummer H1 vehicle based on the M998 Humvee. Simple toy-car easy to print supportless design. Original size 68x90x180.(can be printed on Prusa MINI) info: https://en.wikipedia.org/wiki/Hummer_H1 Printer setup: Nozzle diameter 0,4…
So, what's this then? If you do any kind of photogrammetry, markers are great for ensuring that the software ‘recognizes’ what areas are shared between images. While scale markers make it far easier to lock said scans to the correct…
Hey! Someone stepped on my glasses and broke the frame, so I was forced to make my own temporary frame for the remainder of my waiting time for new glasses. Might help someone out if they have the same problem or they just want to wear 3D…
Double-sided crossing track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight…
Wallart of EC135 helicopter, scaled to fit MK3s bed, also included original STL (1m long)
The adapter to put this LED bulb in my motorcycle broke, so I designed a replacement. It fits a 15mm LED bulb and has an area for a set screw. It adapts to an H9 or H11 headlight. You will also probably need an O-ring or to print a TPU…
I love the original design to death, but I tend to “reduce” or remove branding on printed parts for personal use, and these are basically those changes. In this case, reduced means the branding geometry was moved inside the clamshell, and…
A remix for the great H1 case that supports the new, longer, 1100mAh battries that are now being sold by MakerFocus:…
Large version of my EC135 wallart , precut and scaled to fit on MK3s, also inluded is original sized file (1m long). Prints easily, glue with superglue and display (I am using poster gum to mount on the wall)
A vertical wallmount for the LEGO Rescue helicopter Set 42145 I printed mine in ASA 0.2 Layerheight 3 perimeters 0.4 nozzle 20% infill grid. Prusament ASA Orange. Also printed a test in PETG, which most likely would've been enough Wall…
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
Outline holder for Brother P-Touch PT-H110 label maker.
Lego Army Hummer H1 Taliban
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…
Fun outdoor windmill remixed from mobiobi's Airbus H145 Helicopter and modified with parts from PRINTER's windmills ( Windmill and Windmill XL ). It is an easy print (don't be intimidated by the number of parts) that needs no supports or…
To replace the locking mechanism first you need to remove the hex screw from the inside of the connector, set it and the twist lock that should now come free to the side. Next if it hasnt completely fallen apart by now you need to finish…
Want to try new front sight height? Choose one, print with highest quality (from ASA/ABS or similar heat resistant filament) and install on Your CZ. Before install use fine sandpaper to smooth out top of the post. I've tested it and it…
I wanted a bracket so I could mount fans in the back of my NZXT H1 case without them being visible while still being able to use the exiting back panel. Since I couldn't find anything quite what I wanted I designed my own. This should…
Muzi Works has a great assembly document in their website for putting this thing together, the PDF attached is directly from them and it is an excellent writeup. For Bambulab files, please download off of Makerworld…
This is a compatible replacement for the DeWalt h1400196008 case handle, which is used in their TStak boxes, and it currently unavailable as a separate OEM part. There is a common modification to the DeWalt Tough System 2.0 Double Drawer…
The remix by @tehspiah works great with Heltecv4. As I'm using the official GPS, I needed to fit the GPS in so I added a little cavity in the TOP part.
I made this model in order to keep using my old case, the Thermaltake Versa H17, but with my new processor that produced much more heat (i5-12500). However, the stock H17 is not a very good case in terms of airflow, and there are…
The Eurocopter EC135 , now known as the Airbus Helicopters H135, is a twin-engine light utility helicopter renowned for its versatility and advanced design. Introduced in 1996, it features a quiet Fenestron tail rotor, making it ideal for…
Update: *2021-01-09 : Added 10mm, 25mm, and 29mm spacers with a different socket configuration (labeled mk II). This new configuration might work better depending on your printer tolerances. The 29mm spacer gives more room for fans on the…
This is a base for the Heavy Headphones H1H which is available in smooth and rough. Update: The side walls are now higher for a better grip. Here I have another Skadis holder for the shells.…
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
I replaced DeepCool CH160 glass panel with this design which replicates the 3.5mm squares on the rest of the PC case. I printed this on BL P1S and split the print down the center. I added butterfly clips which are used to keep the two…
MJX 16230 Hyper Go Steering Cup for model h16bm Part number is 16230 As far as I can tell, it should work for both sides; if not, this one was designed for the right side (If you are looking at it from the back.) Just mirror it in your…
Slim, compact enclosure designed for a 1.3" SH1106 128x64 I2C OLED display module. The case dimensions are based on a specific display variant, though slight size differences between manufacturers are common. Clearances are kept tight to…
I was missing the I/O-shield of am ASUS H110i-Plus D3 mainboard. So the easiest way is to create my own. Update: Due to a request by Hannes, I have re-uploaded the STL including fusion 360 archive, STEP File and a DXF File. If you want to…
The PC in the picture doesn't have a slot for a DVD reader like this, yet I still find myself using DVDs. With a SATA to USB cable, this can be hooked up to a USB port and the disks can be used at the edge of a desk. This model requires 4…
I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the measurements were pretty low. There is plenity of space for the cables, so you should be able…
This is my first attemp for a sensor case, which reads temperature, humidity and lux. It uses a d1mini flashed with Tasmota and a DHT22 and BH1750 (GY-302) as sensors. The data is published via MQTT to my HomeAssistant instance. This is a…
Conception My heltec v3 came with these large 5dbi antennas that couldn't fit in the original case and were really clunky to use. While the original idea for this remix was provided by the reddit user u/horse_11, who was kind enough to…
Filament indicator leds and slightly bigger holes
LEGO Hummer H1 Ambulance
This is a remix of blackholesun_445's toolbox handle. I edited the STL file to make it a little easier to print (I had trouble with the overhang angles). See the 3MF file for the orientation in which to print, or use it to generate gcode…
I thought it was weird that the H1 extended back required supports, so I remixed it.
I wanted an out the front mount for my wahoo elemnt roam for my canyon h11 cockpit. the mount that I got from canyon did not flow well with the aerodynamics of the wahoo mount so I made one. This one is like the canyon mount and the wahoo…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)
HUMMER H1 This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
This is an attachment for the Eufy H11 HomeVac. I reused the base from tokyo2ooo 's Eufy HomeVac H11 Broad Nozzle Adapter and created the attachment head to get into small crevices. This is very handy in the tight spaces around my…
CAD model of the H1 case by Muzi Works. Full reverse engineering from the official STL. The model is completely associative and easy to modify for custom batteries, antennas, connectors, etc. Original model by Muzi Works: - Official…
This version is normal ATX compatible I/O shield for Gigabyte H110M-H motherboard.
Couldn't find a simple mount/housing for ELPs 16 Megapixel USB camera module, which can be mounted behind the bed, facing the front of my Voron 2.4. Made it especially for ELP-USB16MP01 “H110”(undistorted 110 degree lens, FOV is about 107…
Bei der Garderobe JASMIN 30B1 (Schuhschrank, Schuhbank) brechen sehr schnell die Halter H1 für den Schubladenauszug. Diese Ersatzhalterungen sind etwas größer und verstärkt. Es können bei der Montage die originalen Schrauben wieder…
3D printable and re-usable durable April Tags for FIRST Teams. These were tested and found to produce identical results to the ones on field in 23-24. “Full Size” are 266.7mm x 266.7mm which we print on a Prusa XL very nicely. “Prusa MKx…
EN I bought this tent Decathlon MH 100 (2People) a few years ago. When setting up, the two brackets always unfolded for me. So I always held them together with Velcro, which you use as a substitute for cable ties. But I didn't find this…
This is the EXTREMELY rare Shimano TL-FH10 Dura-Ace 7400 freehub removal tool from the 1980s/early '90s. Only 3-5 of these come up on e-bay every year and they sell for $60-100 each for what is essentially a SINGLE BOLT. Not only did I…
Summary Since every other USB-C mod didnt fit my needs, I decided to create one on my own. This prototype is currently in green - will try to print it in resin in black or grey. PARTS USED: RePSX variant (white pcb in my case): PDC004-PD…
Updated version of the Aqara Light Switch Spacer by Doowle (on Thingiverse) to fit the up-to-date version of the Aqara H1 Light Switches. I have lowered the roundness of the edges and updated the measurements(original version by Doowle…
Lamb for bolt or nut M5 D30 H15
Overview I just got into Mestastic and really appreciated the H1 - Case for Heltec V3 running Meshtastic by muzi.works . However, I wanted a way to carry the device a little easier. Taking some inspiration from another design, by Alley…
Charger holder for Xiaomi Watch Charger holder for Xiaomi Watch 2 Xiaomi Watch S2 Xiaomi Watch S3 Xiaomi Watch S2 Pro Xiaomi Watch H1 Magnets: 7,4 x 3,9mm (No magnets needed to attach to the table) Easy charger assembly without glue or…
Since the HomeVacs nozzle is a bit small I created a larger adapter to more easily clean small dirt of tables, floors, carpets or sofas. The 3mf files contains support enforcers but after printing they were not very easily removable and I…
I'm a sucker for heatset inserts, and I figured if you're occasionally maybe opening the device, might as well put a heatset insert in there, remove the chance of breaking plastic threads. This remix was made with CNCKitchen's short m3…
This is the cockpit I created for the Der Jet DH100 Vampire Jet Model. The files include all required STL files to print the cockpit parts as well as the resized gauge photos to fit the printed dash panel. This will require an advanced…
A simple replacement I/O shield for ASRock H110M HDS motherboard.
Airbus Helicopters H130 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
The new MT-SYSTEM expansion: These drawer boxes are available in different versions with alternating numbers of compartment levels which can individually be filled with drawer cases of various layouts and heights (H1-H3). What does 3xH1…
Inspired by Mic zoom h1 holder by Rukey and Rode Shotgun Shock Mount. Parts should be glued together.The tripod screw is supposed to cut itself into the hole. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No…
Has space for the Zoom H1 audio recorder along with two AA batteries, so you can take it with you while keeping it protected. Simply place the recorder in the bottom part along with one or two AA batteries and snap the case closed. The…
The new MT-SYSTEM expansion: These drawer boxes are available in different versions with alternating numbers of compartment levels which can individually be filled with drawer cases of various layouts and heights (H1-H3). What does 3xH1…
A battery case for storing a pair of batteries. Three options to suit: BLX-1 for the Olympus OM-1 and OM-1 II BLH-1 for the Olympus E-M1 mk2 and mk3 DMW-BLK22 or DMW-BLF19 for the Panasonic G9 or G9 mk2. Uses a pair of 10x3mm magnet to…
Osłony zabezpieczające podczas upadku mojego autorstwa (pliki 1,2,3) Pliki 4,5 nie są moje , należy je szukać n stronie: https://makerworld.com/pl/models/990931-meijiaxin-h12y-spare-tire-side-panels?from=search#profileId-966410
In this remix, you'll find stronger tabs, the addition of a second screw to make the case more shock-resistant and resistant to repeated opening and closing of the case for modifications. The battery compartment has been reduced by 9mm in…
A much more portable and practical version of my other case, now with a much improved screw-on cap. WARNING: LITHIUM BATTERIES ARE DANGEROUS. BE CAREFUL! I AM NOT RESPONSIBLE FOR ANY KIND OF DAMAGE!!! You can salvage electrodes from other…
I have remixed the mount from Brother P-touch holder by RDX_x , thanks. ORIGINAL POST DATE 06-MAY-2020 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 Infill: 5% Filament: Any PLA White…
Hang your pTouch labeler on your multiboard using multipoint mounts.
I modified the holder from @vivamus3d to adapt the Brother P-Touch H110 holder for the honeycomb storage wall. You will need three HSW M3 inserts to attach to the wall.
A simple lens hood made for the Sony 55-210mm F4.5-6.3 lens. Begone lens flare! For the print I used a 0.4mm nozzle, 0.2mm layer height. I have added supports at the bottom for the bayonet mount and also a brim because this is a…
