Volkswagen Golf MK5 / V armrest CD changer replacement container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement container for in the armrest where usually the CD changer sits.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Replacement container for in the armrest where usually the CD changer sits. My VW golf mk5 originally had a CD changer, but I don't have any CDs to play. This container adds some storage space instead.
V2 is slightly smaller to add more clearance for the pcb mount (see below). If you don't plan on using it, you can use the V1 version.
Because this is a niche item, please make sure to post a make with feedback if you happen to use it!
Printing
Matte black filament (e.g. carbon fiber) is recommended, do not print in PLA because it will melt on a sunny day. Make sure to dry your filament for the best results.
Can be printed without supports, though this can cause some ugly bridging at the top (but invisible when installed). A little 5 gram test piece is included to check the bridging, as well as the clip strength.
For a nice-looking surface finish, I recommend these settings:
Hilbert curve top layers
Ironing for all top surfaces
Brim to prevent warping
Assembly
The container requires a M3x4x5 heat set insert at the bottom. The ‘nipple’ attaches to the bottom of the container using a 6mm M3 screw.
Esp32 pcb mount
There are four extra holes to mount a custom pcb with an esp32, where the esp32 emulates a CD changer. The code and the files for the pcb can be downloaded here: https://github.com/Bob-vdV/BT-VW-CDC .