1 / 4
Awning fixation für C-Slot slide - T5/T6 — image 1
1 / 4

Awning fixation für C-Slot slide - T5/T6

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple fixation for a tarp, so you can use it as an awning on your T5/T6 with an C-rail.

Rating
5 / 5
Likes
47
Downloads
189
Makes
2
Views
2,789
Reviews
2

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

I designed this parts, so you can use a tarp as a awning by using the C-tracks on your VW T5/T6.

You will need:

1x Hexagon head screw - M6 x ≥20mm - better longer (depends on your tarp)
1x self securing nut - M6

Maybe you need to press the screw in the slot nut "Nutenstein", it depends on how much you are off to the dimensions.
It should have an wrench size from 10mm. My prints came out with 9,6mm to 9,8mm, wich caused a tight fit. So its a feature, becuase you dont need any glue.

 

 

I would print the "Nutenstein" with the long small face down, so you don´t need any supports.

When printing the "Drehknopf" I would suggest to print the small diameter as bottom. You will need supports, but not in the hex hole. This makes it easy to remove the supports.

 

I also designed a carrieng box for 5 sets. It is work in progress and should be online in a few days.

Tags