Awning fixation für C-Slot slide - T5/T6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple fixation for a tarp, so you can use it as an awning on your T5/T6 with an C-rail.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 189
- Wydruki
- 2
- Wyświetlenia
- 2789
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this parts, so you can use a tarp as a awning by using the C-tracks on your VW T5/T6.
You will need:
1x Hexagon head screw - M6 x ≥20mm - better longer (depends on your tarp)
1x self securing nut - M6
Maybe you need to press the screw in the slot nut "Nutenstein", it depends on how much you are off to the dimensions.
It should have an wrench size from 10mm. My prints came out with 9,6mm to 9,8mm, wich caused a tight fit. So its a feature, becuase you dont need any glue.
I would print the "Nutenstein" with the long small face down, so you don´t need any supports.
When printing the "Drehknopf" I would suggest to print the small diameter as bottom. You will need supports, but not in the hex hole. This makes it easy to remove the supports.
I also designed a carrieng box for 5 sets. It is work in progress and should be online in a few days.
