1 / 4
Car Speaker Adapter 165 mm (eg. VW Passat 3BG / B5, ...)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
165 mm × 40 mm speaker adapter for VW Passat 3BG/B5; PETG print; M4 heat-set inserts; fits many VW/SEAT models. Enjoy.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 286
- Makes
- 1
- Views
- 1,362
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Speaker Adapter Ring - 165 mm x 40 mm
Sturdy 165 mm (6.5") adapter ring, 40 mm tall, for clean aftermarket speaker installs. Designed for VW Passat 3BG / B5 and commonly compatible with other VW/Škoda models from the same era (verify hole pattern and door carrier).
Features
- Inner/outer diameter: sized for 165 mm speakers
- Height: 40 mm (adds clearance to window regulator/inner skin)
- Mounting: perimeter screw holes, prepared for heat-set inserts
- Geometry: stepped double-ring profile for stiffness and a flat speaker seat
Tip: Add a thin closed-cell foam gasket between ring and door to prevent buzz.
Compatibility (examples)
- VW Passat 3BG / B5
- Other VW/Škoda vehicles of similar years (check door carrier and bolt pattern).
Print Settings (recommended)
- Material: PETG
- Perimeters / Outlines: 4
- Top Layers: 5
- Bottom Layers: 5
- Infill: 15 %
- Layer Height: ~0.20 mm
- Nozzle: 0.4 mm
- Orientation: Wider side up
- Supports: off (not required)
- Bed Adhesion: I did not use a Brim but some 3DLac
Hardware
- Per ring: 4× heat-set threaded inserts M4 × D6 × L8
- Insert with a flat soldering-iron tip; press until flush.
- Screws: M4 (length depends on door carrier and speaker basket).