1 / 4
Car Speaker Adapter 165 mm (eg. VW Passat 3BG / B5, ...) — zdjęcie 1
1 / 4

Car Speaker Adapter 165 mm (eg. VW Passat 3BG / B5, ...)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

165 mm × 40 mm speaker adapter for VW Passat 3BG/B5; PETG print; M4 heat-set inserts; fits many VW/SEAT models. Enjoy.

Ocena
5 / 5
Polubienia
43
Pobrania
300
Wydruki
1
Wyświetlenia
1403
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Speaker Adapter Ring - 165 mm x 40 mm

Sturdy 165 mm (6.5") adapter ring, 40 mm tall, for clean aftermarket speaker installs. Designed for VW Passat 3BG / B5 and commonly compatible with other VW/Škoda models from the same era (verify hole pattern and door carrier).

Features

  • Inner/outer diameter: sized for 165 mm speakers
  • Height: 40 mm (adds clearance to window regulator/inner skin)
  • Mounting: perimeter screw holes, prepared for heat-set inserts
  • Geometry: stepped double-ring profile for stiffness and a flat speaker seat

Tip: Add a thin closed-cell foam gasket between ring and door to prevent buzz.

Compatibility (examples)

  • VW Passat 3BG / B5
  • Other VW/Škoda vehicles of similar years (check door carrier and bolt pattern).

Print Settings (recommended)

  • Material: PETG
  • Perimeters / Outlines: 4
  • Top Layers: 5
  • Bottom Layers: 5
  • Infill: 15 % 
  • Layer Height: ~0.20 mm
  • Nozzle: 0.4 mm
  • Orientation: Wider side up
  • Supports: off (not required)
  • Bed Adhesion: I did not use a Brim but some 3DLac

Hardware

  • Per ring: 4× heat-set threaded inserts M4 × D6 × L8
  • Insert with a flat soldering-iron tip; press until flush.
  • Screws: M4 (length depends on door carrier and speaker basket).

 

 

Tagi