1 / 4
Replacement Noz2Noz Folding Soft Dog Crate Slide-Lock — image 1
1 / 4

Replacement Noz2Noz Folding Soft Dog Crate Slide-Lock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Part to repair broken slide-lock piece on a Noz2Noz soft dog crate.

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial — Share Alike

The third photo shows the original part — starting to fail — that this replaces.

The original parts have a long through-cut slot on the back side, which seems like a poor design choice. In any case, the original parts are apparently subject to failure.

This replacement snaps on, so there is no need to remove/replace the hinge rivets on the frame to thread it on.

I printed this out of PLA on a Prusa Mini+ with a 0.4 mm nozzle and 0.2 mm layer height, 15% cubic infill.

The “channel” piece prints on end without supports.  The STEP file includes a designed-in brim (as a separate part) for stability. I printed this with five perimeters and five top and bottom layers.  (It seems plenty sturdy.  Fewer perimeters would probably have been sufficient.)

The “cap” piece prints flat.  The STEP file includes designed-in supports for the latch inset overhangs.  It also includes a modifier part for the double-arrow marking.  I altered the infill angle in this modifier to make the arrow visible.  (The double-arrow part could also be used to print the arrow in a second color — though its thickness should probably be scaled up if used that way.)  I printed the cap with six perimeters, and five top and bottom layers.

Included here are two STEP files, one for each piece; and a complete PrusaSlicer .3mf file for the Prusa Mini+.  (For completeness, I've also included STL files, but I did not print from those, so no guarantees.  The STL files do not include designed-in supports, brim, or the modifier part for the double-arrow marking.)

Tags