Rail Mount for Sienci AutoZero Touch Plate Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
T-slot bracket for LongMill Mk2/Mk2.5 rail to hold Per S.'s AutoZero Touch Plate Holder.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 48
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I really like Per S.'s holder but I wanted to mount it to my Longmill Mk2 on the Y rails. So I created this bracket with matching holes.
If you already have the holder, just print the bracket. Or print them separate if you want to avoid using supports. I included a combined model for single-printing but it will need supports.
The bracket is designed for M4 x 6 heat-press threaded inserts but you could also just glue the two parts together. Or print the single-piece model. As mentioned in Per S.'s original, you need a ferrous M6 nut and bolt/screw to attach the sensor magnet.
For printing I would go with 5+ walls for a 0.4 nozzle or maybe 3+ for a 0.6 nozzle. Layer height doesn't matter as much but I printed at 0.2mm in regular PLA.
