Rail Mount for Sienci AutoZero Touch Plate Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T-slot bracket for LongMill Mk2/Mk2.5 rail to hold Per S.'s AutoZero Touch Plate Holder.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I really like Per S.'s holder but I wanted to mount it to my Longmill Mk2 on the Y rails. So I created this bracket with matching holes.
If you already have the holder, just print the bracket. Or print them separate if you want to avoid using supports. I included a combined model for single-printing but it will need supports.
The bracket is designed for M4 x 6 heat-press threaded inserts but you could also just glue the two parts together. Or print the single-piece model. As mentioned in Per S.'s original, you need a ferrous M6 nut and bolt/screw to attach the sensor magnet.
For printing I would go with 5+ walls for a 0.4 nozzle or maybe 3+ for a 0.6 nozzle. Layer height doesn't matter as much but I printed at 0.2mm in regular PLA.
