1 / 4
Bowden Pneumatic Adapter from PC4 M8x1.0 to M8x1.25
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for PC4 M8x1.0 Bowden Pneumatic Connectors to M8x1.25
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 91
- Makes
- 0
- Views
- 683
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This enables you to connect a PC4 M8x1.0 pneumatic connector to a M8x1.25 thread (which incidentally is what the Prusa Mini uses).
The internal clearance is 4.5mm, which in other words makes it very suitable for a thru-connector which let's you push the entire PTFE tube through the connector.
Should be printed with the “nut”-side down.
Layer height 0.15mm. Use 3+ perimeters, any less might weaken the connection between the input and the output.