1 / 4
Bowden Pneumatic Adapter from PC4 M8x1.0 to M8x1.25 — zdjęcie 1
1 / 4

Bowden Pneumatic Adapter from PC4 M8x1.0 to M8x1.25

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for PC4 M8x1.0 Bowden Pneumatic Connectors to M8x1.25

Ocena
0 / 5
Polubienia
2
Pobrania
91
Wydruki
0
Wyświetlenia
683
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This enables you to connect a PC4 M8x1.0 pneumatic connector to a M8x1.25 thread (which incidentally is what the Prusa Mini uses).

The internal clearance is 4.5mm, which in other words makes it very suitable for a thru-connector which let's you push the entire PTFE tube through the connector.

Should be printed with the “nut”-side down.

Layer height 0.15mm. Use 3+ perimeters, any less might weaken the connection between the input and the output.

Tagi