Ryobi Charger 63mm Multiboard Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two pegs on separate panels, each for 3 Multiboard snaps to hang the charger with 63mm between mounting holes
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 42
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Share Alike
Two parts, one adds and one removes 6mm from the centerline. If you install them with 2 grid positions inbetween, there will be 75 - 12mm = 63mm between the pegs. You can also swap them around and get 75 + 12 = 87mm if you have a device with such mounting holes. Or any other combination of N 25mm +/- 12mm. Or you could print one of the options twice and have yourself (N * 25mm) distances.
They are pretty much impossible to orient in a good way on the printer, I ended up printing them upright - the same way they sit on the wall, which is not great. Needed some supports and definitely has some weak parts. But it holds just fine nonetheless!