Convoy S6/S7 Rugged Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage box for your Convoy S6 or S7 with or without a pocket clip (screw on design).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple box design for your Convoy S6 or S7, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch.
You will need 3x M3x20 Screws.
The tolerances are pretty tight, if your printer is calibrated correctly you should be getting a satisfying plop sound when pulling out the light. If you need a version with more wiggle room let me know.
I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness.