1 / 6
Dyson DC14 Cord Retainer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cord retainer for a Dyson upright vacuum cleaner.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 98
- Makes
- 0
- Views
- 678
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Our Dyson DC14 upright took a bit of a tumble and the cord retaining arm broke. This replacement part is a fairly easy print (there are supports) and an easy repair.
Disassembly/Repair:
- Use a spudger (or sharp edge) to pop the gray center cap (see photo) off the cord retainer.
- Unscrew the retaining arm – keep the screw and spring.
- Reverse the steps to replace with this print.
Printing:
- Cord retainer
- PETG recommended for strength (brittle PLA may not survive another tumble)
- Print with the arm-side flat on the build plate
- Print with supports on the build plate only
- Cap (optional)
- Print flat side down
- No supports
- This print is untested - I reused my old cap