1 / 8
Toyota Tacoma (4th generation) bed top rail shim (for use with Deck Rails in original factory location) — image 1
1 / 8

Toyota Tacoma (4th generation) bed top rail shim (for use with Deck Rails in original factory location)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A shim to keep the plastic bed rail from twisting or warping, NOT for the OEM tonneau cover (see remixed model for that)

Rating
5 / 5
Likes
23
Downloads
203
Makes
0
Views
1,358
Reviews
1

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

The 4th generation Toyota Tacoma has a known issue where the plastic rails on top of the bed aren't particularly well supported at the front. With age & heat the adhesive strip can pull loose and the rail can warp causing a large ugly gap where it meets the painted fender, it's often made worse when a bed cover/tonneau cover is installed. When clamped down to the bed they push on the inner edge of the plastic top rail causing the outer edge to twist upwards. This shim fits beneath the top plastic rail/cap and supports the inner edge, transferring any downward force to the OEM Toyota Deck Rail System and keeps the top rail from warping.  See pictures.

The bed top rail is held on with integrated plastic clips, you don't need to remove the entire top rail, just pop the first couple of clips at the front of the bed nearest the cab. This adapter shim has a racetrack shaped protrusion on the bottom that fits into a matching hole in the top of the OEM Deck Rail track. If your tonneau cover is already installed and you don't want to remove it, no problem, all you need to do is take off the Deck Rail (just a few bolts) and slip this shim up underneath the plastic top rail at the front, right above the forward-most Deck Rail bolt. (find the racetrack shaped hole on the top of the Deck Rail) The shim fits in vertically with the three fingers pointing upwards. There are stiffening ribs molded into the underside of the plastic top rail, the fingers on the shim fit around these ribs. You may even be able to leave the rear-most bolt on the Deck Rail and remove the rest, then pivot the Deck Rail down, insert shim, pivot the Rail back up and reinstall/tighten all bolts.

I designed these shims based on the measurements of my bed and rails, if there are manufacturing variations on your Tacoma bed you may need to modify slightly. Not sure the bottom protrusion is even entirely necessary, if removed the shim is still completely locked into place once the plastic bed top rail is snapped down. If you need to adjust height it should be easy to trim off the protrusion, then modify the thickness of the base as needed. 

Note that this shim is for the stock bed rail top and OEM Deck Rail System ONLY when installed in the factory positions. If your tonneau cover/bed topper requires you to relocate the Deck Rails to a lower position with adapters (such as the OEM Toyota tonneau cover) then this model won't work. See my remixed model for the OEM tonneau cover. If you installed a RealTruck/BakFlip MX4 tonneau cover on your 4th generation Tacoma prior to approximately March 2024 then you are likely using a kit designed for the 3rd generation Tacoma.  The use relocation adapters that are considerably longer leaving a very large gap, neither of my existing shims are suitable. If I get proper measurements I may be able to make a shim that will work in this unique situation.

Printed in PETG, 0.4mm nozzle, bumped top and bottom shells to 5 and outer walls to 4 for strength, honeycomb infill pattern. I manually painted support beneath the racetrack protrusion, your printer may not need support there but on mine it made it slightly cleaner, and the added cost/time is negligible.

Tags