Uni-T UT181 magnet adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for Unit-T UT181 or similar multimeter for attaching magnetic holder.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspirovaný příslušenstvím Fluke vytvořený adapter pro multimetr Uni-T UT181, takže “samodomo” řešení. Konečně volné ruce při měření v rozváděčích. Použitý magnet se závitem M3 a silou cca 15kg.
Šroubek s velkoplošnou podložkou je o cca 2mm delší než je hloubka dílu, jeho zašroubováním je díl v multimetru zajištěn. Zároveň velkoplošná podložka slouží k “zaparkování” magnetu. :)
Inspired by Fluke accessories, I created an adapter for the Uni-T UT181 multimeter, a DIY solution. Finally, I can have free hands when taking measurements in distribution panels. I used an M3 threaded magnet with a pull force of approximately 15kg.
The screw with the large washer is about 2mm longer than the depth of the part, so when you screw it in, it secures the part to the multimeter. At the same time, the large washer serves as a "parking spot" for the magnet. :)