3D Printed Parts for VEX Field Monitors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts for mounting various components to the back of VEX Robotics Competition field monitors.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 9
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v2.0
These are 3D printed parts for mounting a Raspberry Pi, field control hardware, and other accessories to the back of VEX Robotics Competition field monitors. The 3D printed parts are attached to the monitor with strong double-sided tape (e.g. VHB tape), and have #8-32 heat-set inserts (example link) into which the parts are screwed. That way everything is mounted securely, but it's still easy to remove and swap out a part if something breaks mid-event.
Descriptions of parts:
- “Pi Case Lid” and “Pi Case Base” comprise a case for a Raspberry Pi 3B, 4B, or 5. The base has heat-set inserts for attaching the lid, and also mounting holes to screw it to 2 2in rails. The Pi case is a modified version of this design by Taylor Chien.
- “2in Rail” is a simple rectangle with two heat set inserts spaced 2 inches apart. Used to mount the Pi case.
- “3in Rail” is the same thing but with the holes 3 inches apart. Used for mounting the V5 smart field control brain or legacy field controller.
- “1.5in Rail” is the same thing but with the holes 1.5 inches apart. Used for the compact brain bracket.
- “Brain Bracket” attaches to the mounting holes on the back of V5 brain and adds mounting holes accessible from the front, to be screwed into the 3in rail.
- “Compact brain bracket” is a more compact bracket for mounting the V5 brain. Attaches to the short side of the brain with 0x2 VEX IQ pins.
- “PoE Splitter Mount” is for mounting this PoE splitter, which can be used to power the monitor and/or V5 brain. The mount is attached directly to the monitor, and a couple of velcro straps hold the splitter to the mount.
- “Switch Mount” is for mounting this PoE+ repeating switch.
All parts can be printed in the obvious orientation without support.
