Raspberry Pi Touch Display 2 (5-inch) IKEA Skadis Mount [Portrait]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mount for the 5-version official RPi Touch Display 2.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for the 5-inch version of the Raspberry Pi Touch Display 2 (SKU SC1975) only.
Orientation is portrait only, but either way. The default is as pictured with USB and ethernet ports at the bottom. The (alt) version puts the ports at the top.
All ports and GPIO pins are accessible, with enough clearance between the Pi and the Skadis for most heatsinks and connectors. Total maximum height of the Pi and addons is 25.5mm (or around 8mm above the USB ports for reference). The front of the touch screen sits 42mm from the face of the Skadis.
No additional hardware required. Everything clips firmly into place and once mounted is very study. There's no need to remove the Pi, display ribbon or power cable beforehand.
No supports.
See here for my landscape version: https://www.printables.com/model/1396822-raspberry-pi-touch-display-2-5-inch-ikea-skadis-mo