Culver's Cup Holder (20oz)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder with a handle for 20-21 oz Poly Paper cups used by many fast food restaurants.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not everybody has hands big enough or strong enough to hold a full cup. I designed this holder to add a handle and make it more like a mug for easier handling.
Printing
Easy print using any material. Needs no support. The only special setting I used is scarf seam on the upper and lower parts – it is not required, but makes a smoother surface.
Assembly
Very easy to assemble.
- Slide the lower part up into the handle
- Insert a pin to hold it
- Slide the upper part down into the handle
- Insert a pin to hold it
- Drop in cup
Note: The upper and lower parts have an open area next to the handle. Use this area to push the pin out as needed.
Usage
I recommend you put the cup into the holder before filling it.
Note
The cup I tested is a 21oz Poly Paper cup from Culver's®. I expect it will likely work for the 20-21oz cups used by several other fast food places.
I made the lower holder part with a Culver's® logo. If you would prefer no logo, you may suppress the "svg sketch" in the lower component (I included a no logo STL). You could also replace it with a different logo.