Home Assistant ZWA-2 Cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.08 – €1.32 net (excluding VAT)
For file: Zwa2_Base_0.4n_0.2mm_PLA_COREONE_35m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.20 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 34.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cover for the Home Assistant ZWA-2 zwave antenna, if you want to have the antenna in another color or color combination
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 1
- Views
- 327
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cover/case for the Home Assistant ZWA-2 z-wave antenna if you need another color to better fit your home. There are single color versions for different printer sizes and one version if you want to have a multi color antenna.
Recommended settings:
- .40mm nozzle
- .2 layer height
The antenna base needs the following additional settings
- Supports
- Variable layer height