1 / 6
CYD ESP-32 Case For Battery GPS Mod Kit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a few edits.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 167
- Makes
- 0
- Views
- 1,782
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A variation of two other CYD housings.
For Best Results:
Print in PETG or PLA with 15% infill or higher
Requires:
- (7) M3x4x4 or M3x5.7x4.6 Heat Press Inserts.
- (4) M3x6 Socket Head Screws.
- (4) M3x12 Socket Head Screws.
Changes Include:
- Expanded housing space to fit 1100mAh battery.
- Relocated standoffs and mounting screws for GPS + Battery PCB from Hedge Tech.
- Relocated charge port and power switch location. ( Side mount V2)
- Added port for CYD board connection to usb-c access
- Added border for better screen protection
- Removed stylus hole A variation of two other CYD housings.
Final Note:
- V3 Is the largest and deepest will fit 1100mAh Battery.
- V2 Is for small flat battery will NOT fit 1100mAh Battery.
- V1 Is standard layout on switch at bottom will also fit will fit 1100mAh Battery.