1 / 7
Garmin Dakota 20 GPS Power Button
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rubber sidewall was gone, button didn't work anymore. Opened it up, made a power button. Works.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
Powerbutton fix for the Garmin Dakota 20 GPS.
The rubber sidewalls were gone, and the button didn't work anymore.
Print Settings
- Layer Height 0.16
- Infill: 20%
- Supports: No
- Raft: No
- Brim: No
Instructions:
- Open the battery cover
- Remove batteries
- Remove 6x T6 screws
- Be careful: Remove the front (with screen), by releasing the ribbon cable
- Remove 4x T6 screws
- Remove circuit board
- Beware: the button is not centered, so it fits against a mini ledge, flush in the button holder.
- Place button
- Fit circuit board
- Beware: Don't over-tighten the screws, the button should still work.
- Fit 4x T6 screws in circuit board. Test if button works by slight clicking sound
- Place ribbon cable back on circuit board
- Fit the screen/shell
- Fit the rest of the 6x T6 screws.
- Place batteries
- Button should work fine and device should respond to button, if it doesn't it's probably over-tightened.