1 / 7
Garmin Dakota 20 GPS Power Button
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rubber sidewall was gone, button didn't work anymore. Opened it up, made a power button. Works.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Powerbutton fix for the Garmin Dakota 20 GPS.
The rubber sidewalls were gone, and the button didn't work anymore.
Print Settings
- Layer Height 0.16
- Infill: 20%
- Supports: No
- Raft: No
- Brim: No
Instructions:
- Open the battery cover
- Remove batteries
- Remove 6x T6 screws
- Be careful: Remove the front (with screen), by releasing the ribbon cable
- Remove 4x T6 screws
- Remove circuit board
- Beware: the button is not centered, so it fits against a mini ledge, flush in the button holder.
- Place button
- Fit circuit board
- Beware: Don't over-tighten the screws, the button should still work.
- Fit 4x T6 screws in circuit board. Test if button works by slight clicking sound
- Place ribbon cable back on circuit board
- Fit the screen/shell
- Fit the rest of the 6x T6 screws.
- Place batteries
- Button should work fine and device should respond to button, if it doesn't it's probably over-tightened.