1 / 3
Monitor Mount Pole Topper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
add some 1/4-20 mounting to the top of your pole
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Got a pole you want to stick something on top of?
I did, and it was a light. instead of clamping, which seemed ugly, I stuck something in the hole. first iteration started to wobble after time so I slashed it at 45 degrees and now it suspends.
Requirements:
- M4 screw (30mm works best. 25mm should be ok)
- M4 washer
- M4 threaded insert
- ¼"-20 threaded insert (mine are ¾" length but shorter should be okay)
Construction:
- add M4 heat set insert from flat side of smaller part
- insert M4 screw through flat side of larger part
- screw pieces together, but not tight
- add ¼"-20 insert
you are effectively locking in place the M4 screw - slide into the pole hole
- tighten M4 screw
- add accessories
You will find the ¼" hole is recessed, adjust z of object to achieve desired depth.
I'm really not good at modelling so this is a slicer-constructed model
