Vent Cover for GE Space Saver Microwave
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement vent cover that prints on a 256x256 print bed and uses the factory spring clips and screw holes.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 12
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
My old (2004) GE Space Saver microwave (model # JVM1653SH01) had a damaged top vent cover and replacement parts are difficult to locate. So I did what anyone with a 3D printer and several weekends to kill would do, I designed and printed one from scratch.
This design prints in multiple pieces that I just superglued together. It uses the factory screw hole locations and the left/right side spring clips to retain the cover. I'm including the FCSTD file in case anyone finds this useful for other microwaves but needs to adjust anchor locations.
Print in PETG for better heat resistance than PLA.
Printing the left/right rounded clips with “fuzzy skin” set active makes the texture match up pretty close to a textured PEI plate and eliminate the need for sanding and painting.
Use supports for the smaller parts.