1 / 2
120mm Fan Duct for Zotac NVIDIA 1050Ti low profile video card — image 1
1 / 2

120mm Fan Duct for Zotac NVIDIA 1050Ti low profile video card

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replace the loud and unreliable fans on Zotac Nvidia 1050Ti card with a quiet and standard 120mm fan.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
214
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

The low profile variant of the Zotac NVIDIA 1050Ti card has two fans that always spin at maximum speed and are very hard to replace when they fail because they are not standard.

This fan duct/shroud allows you to replace them with a 120mm fan that is quiet and standard.

I printed in ABS so that the shroud would not deform from heat.

You would need to tap four M3 threads into the heatsink, or use self-tapping screws to attach the shroud to the heatsink. I used 6mm M3 socket head screws to attach the duct to the heatsink.

The 120mm fan is attached to the shroud with 30mm M3 screws. The thread is 3D printed into the shroud. You may want to chase it with an M3 tap or use some force to drive the screws in.

Prints without supports with the face holding the fan on the print surface.

Tags