28 models
We created this bracket for the ZOTAC ZBOX Mini PC to use in our interactive table made for Sekisui Plastics. The bracket allows any of the previous and current ZBOX Mini PC's to be mounted to any surface. The VESA mount holes on the…
Print approx. €15.28–€18.67 excl. taxPreliminary estimate for one variant
So I got a new GPU on Ebay and it isn't coming with the regular size GPU bracket, so I figured I could design my own by modifying and referencing models done by Gushie, rasarmg and pankomputerek! I will fine tune the measurements once I…
Inspired by this post: Zotac 3080 Holo feat. Noctua NF-A9 : ZOTAC (reddit.com) I designed a plate which was produced by Schaeffer AG in 1,5mm powder-coated aluminum. On the picture you can see the prototype mounted on my 3080 Ti. It also…
I recently helped to build a PC. Friends graphics card of choice was affordable Zotac's GTX 1060 3GB single fan model. Due to construction/budgetary limits of graphics card it was loud while in high performance mode. We decided to add…
This is a custom shroud for the Zotac RTX 3070ti Trinity GPU, using Arctic F9 PWM fans. It is possible this will work with other Zotac 30 series Trinity cards, but I cannot confirm. The stock card is undercooled and the fans are badly…
This bracket allows the user to mount 2 noctua NF-A9x14 fans with 8 M3x16 screws to make the GPU a lot quieter. I also suggest removing the backplate as it does not cool anything, but rather hinder cooling. Please note that this mod…
Hardware: 6x M2x6 countersunk screw (ISO 10642, DIN 7991) 8x M4x20 countersunk screw (ISO 10642, DIN 7991) 8x M4 nut (DIN 934) 3x Noctua NF-A9x14 PWM fan (or equivalent) Print instructions: Use a material that's capable of dealing with…
A backplate I traced from a top-down view of a GTX 1080 mini to fit onto a GTX 1070 mini. Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Duramic 3D PETG Notes: Make sure not to use PLA, or…
Added: Some 3Dprinter friendly roundness features to corners Fillets to improve strengh Rmove ceilings for print without supports Countershunk holes for reuse original bracket radiator screws
First thing, many thanks to testudor for the original kit, this mod is a life saver. To be clear first, you can mount any 92 mm fan to the original frame, as long you can make it work. But the frame of the be quiet fans were in the way of…
I was gifted a used a ZOTAC GTX 980Ti AMP! Extreme Edition graphics card and its fans where a constant annoyance. Way too loud and rattling. I came across the original by @testudor and was hooked to change this problem. The design by…
I made a few modifications to the original design to better suit my needs. I removed the rim around the shroud from the original model since it kept hitting other components on my motherboard when trying to install it but I didn't have…
I used 2 arctic 15mm P12 slim PWM fans on a Ncase T1 case. The fans are fixed in place with 20mm screws that are included with the fans. They screw directly into the plastic. It's not the most elegant solution, but it works fine. You need…
In the “because I can” category… When the stock fan on my Zotac 1070Ti Mini failed, I got a replacement from inRobert. It turns out I ordered a 1070Ti fan instead of a 1070Ti Mini fan. The only difference is that the diameter of one of…
It's just the travel kit FormD makes but for my GPU, here's the original: https://formdt1.com/products/t1-gpu-travel-kit
This remix aims to make use of the Arctic P9/P9 MAX instead of the F9 fans. With this version you will surely lose access to the second pci-e slot but it doesn't require cutting the fans anymore. Total card thickness: 76mm The top shell…
I needed a way to mount ZOTAC Mini PC's Model ZBOX-EN72080V on walls behind large screen TVs and cam up with this wall caddy. Works well and 10 have been in pace for the last 6 month.
Zotac 3070Ti Amp Extreme Deshroud Adapter Plate for mounting 120mm fans, modelled around noctua 120mm fans, I added recesses to insert a 3mm rod to stiffen the structure and prevent sagging on the overhanging last fan, fans can either be…
I wasn't happy with the cooling performance and noise of my GPU, so decided to de-shroud and fit 2x Noctua 140mm fans. Removal of the shroud is slightly tricky due to 2x screws hidden behind the main board. Noise is now much lower and…
no supports needed if model is printed on its side the Zone's built-in stand is supposed to be open when used with this stand
simple feet for Zotac CI320 NANO require m3 8mm screw DIN965
The low profile variant of the Zotac NVIDIA 1050Ti card has two fans that always spin at maximum speed and are very hard to replace when they fail because they are not standard. This fan duct/shroud allows you to replace them with a 120mm…
Inspired by https://boilingsteam.com/upgrading-fans-with-a-custom-shroud-on-a-rtx3090-goodbye-fan-noise/ Replaces stock fan by two noctua ones for silent operation. I used PETG and with already two months of usage with room temperature up…
The stock fan shroud for the Zotac RTX 3090 sounds like a jet engine at full load, so I designed a shroud to fit two Noctua NF-A12x25s onto it instead of the three stock 80mm fans. Now runs basically silent at full load. Mounts using the…
I used this bracket to mount the GPU to a mirror. Mirror in the picture is from Ikea “ DVÄRGSYREN” holds perfectly with 6 M2 x 20mm screws.
Printing notes Print face down. Supports are encouraged, but not needed. Depending on your printers bridging capabilities. Print in PETG or similar heat resistant materials. Screws 4 x M2*5 for heatsink mount 4 x M5 fan mount screws Other…
This is a 3D printable replacement back shroud designed for the ZOTAC RTX 4080 SUPER graphics card. The primary purpose of this model is to make it easy to change the appearance of your GPU without permanently modifying the original part.…
no supports needed if model is printed on its side the Zone's built-in stand is supposed to be open when used with this stand
