1 / 1
ZOTAC GAMING RTX 5080 SOLID CORE - fan support for deshrouding
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan bracket for 2 120mm fans for Zotac RTX 5080 solid core.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 39
- Makes
- 0
- Views
- 257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
I used 2 arctic 15mm P12 slim PWM fans on a Ncase T1 case. The fans are fixed in place with 20mm screws that are included with the fans. They screw directly into the plastic. It's not the most elegant solution, but it works fine.
You need supports while printing because the cooler has a recessed part that demanded small plastic rectangles on the bottom part so it has to be printed rotated by 180 degrees.