Counting matching models…
Inspired by this post: Zotac 3080 Holo feat. Noctua NF-A9 : ZOTAC (reddit.com) I designed a plate which was produced by Schaeffer AG in 1,5mm powder-coated aluminum. On the picture you can see the prototype mounted on my 3080 Ti. It also…
The fans of MSI RTX 5090 Ventus 3X are very loud and the GPU runs hot. I wanted to replace the fans with better Noctua fans. Here is the deshroud bracket I designed. It probably won't decrease temperatures much, but sound level and pitch…
TLDR Deshroud mod for the MSI Ventus 3080/3080Ti/3090 in the Cooler M case Fan shrouds designed to perfectly fit the Noctua NF-A/F/S12 and bridge the gap between the fan and the GPU heatsink 2 Versions available for use with & without…
Bracket and shroud to attach 2x 120mm fans on an Asus Prime RX 9070 XT GPU. Designed to be used with heated inserts, however STEP files are included so you can customize these to your own needs. It might fit on non XT 9070, however it…
This is a deshroud bracket designed for the ASUS PRIME 5070 Ti/5080 series, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
This is a deshroud bracket for the MSI 5070 Ti Ventus / Shadow / 5080 that utilizes dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
My original fans where starting to making bearing noises, so I made these brackets to allow me to install whatever 120mm or 140mm fans I wanted. This bracket allows installation of 2x120mm or 2x140mm fans. This bracket will make the card…
I used to have two 120mm fans attached with zip ties to my GTX1080, resulting in better temperatures while being quieter. I recently upgraded to a RTX3080ti and since I am an owner of a 3D printer by now I made a shroud to fit 3 120mm…
I'd like to share my deshroud mod for the ASUS GeForce RTX 3070 DUAL graphics card. It holds two 120mm fans (120x120x25) with standard mounting holes. I printed it with a wall count of 3 and 40% cubic infill. It may not look very stable,…
TLDR Deshroud mod for the Ventus 3080/3080Ti/3090 in the Cooler Master NR200 case Fan shrouds designed to perfectly fit the Arctic P12 and bridge the gap between the fan and the GPU heatsink The Normal Fan Screws version of the fanshrouds…
TLDR Deshroud mod for the MSI Ventus 3080/3080Ti/3090 in the Coolermaster NR200 case Fan shrouds designed to fit any standard 120mm x 25mm computer fans and bridge the gap between the fan and the GPU heatsink Fan shrouds can be mounted to…
Added: Some 3Dprinter friendly roundness features to corners Fillets to improve strengh Rmove ceilings for print without supports Countershunk holes for reuse original bracket radiator screws
>>> If you require size/spacing adjustments just leave a comment below This all started when my GTX 1660 TI started making annoying noises . At first I just altered the fan curve and that sort of worked for a while but in the end I…
This is a deshroud bracket designed for the MSI Suprim X RTX 4080 and 4090, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
I designed a low-profile (4mm thick) 120mm fan adapter to deshroud-mod the MSI Ventus 3x RTX 3080. Presumably the 3080 ti and 3090 versions have the same cooler. I made it extra slim to fit the 3 slot configuration of my FormD T1 V1.1.…
Moves the ASUS AP201 140mm intake fans closer to the gpu for deshrouded cooling. The GPU pictured is a deshrouded PNY XLR8 3070 This uses 8 regular case fan self taping screws. 4 screws to mount the fan to the duct and 4 to mount the duct…
Please refer to the original model's page for more comprehensive details, as the original creator has written an extensive guide about it.
My 3rd attempt at designing a way, to add fans to your gpu in a practical manner. PETG recommended because of high temps, but if you position the bracket further away from the heatsink, then it isn't as big an issue. As you might choose…
adapter for 140mm fans, uses original fans screws, and M3x5x4 inserts with M3x35 screws for new fans. NOTE: for full cover you will need to bend 2 radiator's cable hooks
I used 2 arctic 15mm P12 slim PWM fans on a Ncase T1 case. The fans are fixed in place with 20mm screws that are included with the fans. They screw directly into the plastic. It's not the most elegant solution, but it works fine. You need…
Requires 12x M3 5mm OD heat inserts and 12x M3x30mm(for 25mm thick fans) radiator fan screws. Uses the stock fan screws to screw into the heatsink. Modelled to fit NF-A9x25's. But any 90mm fan should work. I suggest printing it at 20-30%…
A fan shroud and cover for the Ventus MSI 5090 3x. Designed to fit Arctic P12 and P8 fans. Adapted from the original by @Saigon_237393 who made the shroud for Noctua fans and in one large section. I sliced the original into multiple parts…
Printed with ABS plastic, layer height 0.1mm To remove the fan shroud on this card, you will have to completely remove the cooling system. If you cannot find a ready-made adapter for connecting fans to the power connector on the video…
Hi, This is a Deshroud mod for my Gigabyte RTX 4080 OC . It makes the GPU 4 PCIe slots tall, but it’s now quieter than the coil whine of my CPU. The mod reuses all the original shroud screws except one. For that one, you can either skip…
Update 19/02/25: Added Screwless version, no pesky fan screws required! --- Have your GPU fans broken down or maybe, on impulse you deshrouded your GPU and can't get it back together? Then we got your back! Here at 3DFreeman's GPU Road…
Use this deshroud mod to quieten your Sapphire Nitro+ 7900XTX. Uses 120mm or 90mm case fans for optimized air flow. I recomment controlling the fans via the motherboard trough "fan control", altough a gpu to casefan pin adapter might work…
Able to use on XFX 9070 line, Swift, Quicksilver, Mecury as i made with tolerances in mind. m3*4*5 thread inserts are required The Cover frame file will do fine with 15mm and 25mm thick fans as long as fans share same thickness.
ASUS Dual RTX 2070 SUPER Deshroud Mod (2x 120mm Fans) A simple deshroud mod to swap the stock ASUS Dual 2070 Super fans for two 120mm fans. Way quieter, much better temps, totally custom. Description Designed this for my ASUS Dual RTX…
The bearings on the original fans of my reference RX6800XT started to grind. So I designed a few very simple rails that can be used to attach two 120 mm fans to the card. I first used the card in a Dan Case A4 H2O, which is why they are…
This is Sebestyén Mátrai's fan mount (split into two parts) for the EVGA FTW3 GPU, see his original model for details here . I printed in ABS with inner and outer brims. I dissolved the waste brims in acetone to acetone weld the two parts…
I wasn't happy with the cooling performance and noise of my GPU, so decided to de-shroud and fit 2x Noctua 140mm fans. Removal of the shroud is slightly tricky due to 2x screws hidden behind the main board. Noise is now much lower and…
A deshroud mod for the ASUS Prime Radeon RX 9070XT, replacing the stock plastic shroud with a low-profile, open-air design cooled by two 140mm fans. The card's existing heatsink and heatpipes stay in place — this mod only replaces the…
I'd like to share my deshroud mod for the ASUS GeForce RTX 3070 DUAL graphics card. It holds two 120mm fans (120x120x25) with standard mounting holes. I printed it with a wall count of 3 and 40% cubic infill. It may not look very stable,…
The fans of MSI RTX 5090 Ventus 3X are very loud and the GPU runs hot. I wanted to replace the fans with better Noctua fans. Here is the deshroud bracket I designed. It probably won't decrease temperatures much, but sound level and pitch…
Requires 12x M3 5mm OD heat inserts and 12x M3x30mm(for 25mm thick fans) radiator fan screws. Uses the stock fan screws to screw into the heatsink. Modelled to fit NF-A9x25's. But any 90mm fan should work. I suggest printing it at 20-30%…
Zotac 3070Ti Amp Extreme Deshroud Adapter Plate for mounting 120mm fans, modelled around noctua 120mm fans, I added recesses to insert a 3mm rod to stiffen the structure and prevent sagging on the overhanging last fan, fans can either be…
deshroud mod for EVGA 3080 You'll need 2 GPU adapter cables if you want to have PMW control of the fans through the graphics card. These are the cables I got.…
Replaces the loud factory shroud and fans, that regularly reached 95-98c, with this deshroud that screws into the factory heat-sink mounting points. Tested with 2 Noctua A9x14 fans with the Low Noise Adapters installed. Brought…
Requires 12x M3 5mm OD heat inserts and 12x M3x30mm(for 25mm thick fans) radiator fan screws. Uses the stock fan screws to screw into the heatsink. Modelled to fit NF-A9x25's. But any 90mm fan should work. I suggest printing it at 20-30%…
