Sapphire Nitro+ 7900 XTX deshroud mod (120mm or 90mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sleek replacement shroud for the Sapphire Nitro+ 7900 XTX, adapting it to 120mm or 90mm case fans
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this deshroud mod to quieten your Sapphire Nitro+ 7900XTX.
Uses 120mm or 90mm case fans for optimized air flow. I recomment controlling the fans via the motherboard trough "fan control", altough a gpu to casefan pin adapter might work and allow for control via the card.
Using Arctic P12 Fans my card performs like this:
Gameplay: ~300W, 55C max @ 750 rpm (silent)
Stresstest: 400W, 65C max @ 1100 rpm (near silent)
BOM (120mm):
amount | item |
|---|---|
10 | M4x12 bolts |
8 | M4 heat set inserts |
BOM (90mm):
amount | item |
|---|---|
16 | M4x12 bolts |
12 | M4 heat set inserts |
The fan adapter is mounted to the GPU using the four existing bolts.
For peace of mind, use a zip-tie to mount the center of the adapter to the GPU cooler rails. This also allows for minimal cable management as can be seen in the fully built picture.
Enjoy!