Sapphire Nitro+ 7900 XTX deshroud mod (120mm or 90mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleek replacement shroud for the Sapphire Nitro+ 7900 XTX, adapting it to 120mm or 90mm case fans
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this deshroud mod to quieten your Sapphire Nitro+ 7900XTX.
Uses 120mm or 90mm case fans for optimized air flow. I recomment controlling the fans via the motherboard trough "fan control", altough a gpu to casefan pin adapter might work and allow for control via the card.
Using Arctic P12 Fans my card performs like this:
Gameplay: ~300W, 55C max @ 750 rpm (silent)
Stresstest: 400W, 65C max @ 1100 rpm (near silent)
BOM (120mm):
amount | item |
|---|---|
10 | M4x12 bolts |
8 | M4 heat set inserts |
BOM (90mm):
amount | item |
|---|---|
16 | M4x12 bolts |
12 | M4 heat set inserts |
The fan adapter is mounted to the GPU using the four existing bolts.
For peace of mind, use a zip-tie to mount the center of the adapter to the GPU cooler rails. This also allows for minimal cable management as can be seen in the fully built picture.
Enjoy!