EVGA FTW3 3x92mm Deshroud Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Deshroud bracket for the EVGA FTW3 3070, 3070 Ti, 3080, 3080 Ti and 3090 heatsinks to use 3x92mm Fans.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Requires 12x M3 5mm OD heat inserts and 12x M3x30mm(for 25mm thick fans) radiator fan screws.
Uses the stock fan screws to screw into the heatsink.
Modelled to fit NF-A9x25's. But any 90mm fan should work.
I suggest printing it at 20-30% infill for rigidity.
Recommend printing it in ABS/ASA or any higher temp filament.
7mm/5mm versions both require heat inserts + radiator screws to mount the fans.
Thin version is 2mm thick and is made to mount the fans from the bottom with standard M5 PC case fan screws. (no heat inserts needed).
Just need a slim screw diver to screw in the heatsink screws through the fan blades.