15 models
I couldnt find a shroud for this specific GPU model so designed one myself. You can revert this mod without trace in case you want to sell the GPU. Printing: Depending on the printer the shroud could be too big to fit horizontally. Either…
This is a custom shroud for the Zotac RTX 3070ti Trinity GPU, using Arctic F9 PWM fans. It is possible this will work with other Zotac 30 series Trinity cards, but I cannot confirm. The stock card is undercooled and the fans are badly…
My original fans where starting to making bearing noises, so I made these brackets to allow me to install whatever 120mm or 140mm fans I wanted. This bracket allows installation of 2x120mm or 2x140mm fans. This bracket will make the card…
Work in Progress: This is a backplate mounted cooling solution for EVGA 3090FTW3, it can be used with heatsinks to enhance the cooling ability of the stock backplate, which has heatpipes. I realized the o11 mini's airflow was not doing…
Pictured supporting a 08G-P5-3767-KR in a Fractal Design Define R4 case. I don't know about fitment for any other card/case combination. This brace supports things at the PCB at the corner rather than by the fan shroud like some do. It…
Recommend smaller resolution for smoother height stepping. Print in any colour to add your own accent piece. Tested on FTW3 only, because of the size difference it will not work with XC3 variants. Should work with RTX 3070 FTW3 as well.…
An updated version of my previous design. Easier printing , better finish of the front side, less support needed and stronger too. The previous version had some issues with deformation over time. I have this version for 2 years and with…
Requires 12x M3 5mm OD heat inserts and 12x M3x30mm(for 25mm thick fans) radiator fan screws. Uses the stock fan screws to screw into the heatsink. Modelled to fit NF-A9x25's. But any 90mm fan should work. I suggest printing it at 20-30%…
deshroud mod for EVGA 3080 You'll need 2 GPU adapter cables if you want to have PMW control of the fans through the graphics card. These are the cables I got.…
This remix aims to make use of the Arctic P9/P9 MAX instead of the F9 fans. With this version you will surely lose access to the second pci-e slot but it doesn't require cutting the fans anymore. Total card thickness: 76mm The top shell…
Cooler for the EKWB backplate for the EVGA 3090 FTW3 Ultra. Uses 5x60mm/1cm fans. 6mm M3 and 10mm M2.5 screws to hold things together. M2.5 12mm to screw it to the 3090. Do not use PLA as it gets soft at 60C. PETG (80C) or ABS (100C)…
I made this 5mm thick bracket that supports 3x92mm fans. You have to mount the fans from below, then mount the bracket to the heatsink between the fan blades (thin screwdriver recommended). Since as far as I know the heatsinks of the EVGA…
This is Sebestyén Mátrai's fan mount (split into two parts) for the EVGA FTW3 GPU, see his original model for details here . I printed in ABS with inner and outer brims. I dissolved the waste brims in acetone to acetone weld the two parts…
Requires 12x M3 5mm OD heat inserts and 12x M3x30mm(for 25mm thick fans) radiator fan screws. Uses the stock fan screws to screw into the heatsink. Modelled to fit NF-A9x25's. But any 90mm fan should work. I suggest printing it at 20-30%…
Requires 12x M3 5mm OD heat inserts and 12x M3x30mm(for 25mm thick fans) radiator fan screws. Uses the stock fan screws to screw into the heatsink. Modelled to fit NF-A9x25's. But any 90mm fan should work. I suggest printing it at 20-30%…
