Door Latch for Prusa Core One Side Storage by @Prusaguy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Door Latch for Prusa Core One Side Storage by @Prusaguy using 6x3mm round magnets and 3M 24mm HVB tape.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 1
- Views
- 236
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Door latch for Prusa Core One Side Storage by @Prusaguy using 6x3mm round magnets and 3M 24mm wide HVB tape.
The 6x3mm round magnets should just press in place. I added a guide area for the 24mm HVB tape. Simply align the tape with this area the align the tape with the edge of the door. The magnets will align with the metal shell to latch the door close. Take caution when attaching the latch to the door it will grab quickly with the HVB tape so align carefully.
I printed mine in Prusament PETG Prusa Orange using the 0.2 speed print profile.
This is the tape I used.
https://www.amazon.com/dp/B07TC16SZ7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1